TRENDnet TPL-110AP manual

Page 7

Windows 2000 / XP

1. Open Network Connections.

-Win 2000: Click on Start, Settings, then Network, and Dial-up Connections.

-Win XP: Click on Start, Connect To, then Show All Connections.

2.Right click on Local Area Connection and then select Properties.

3.Select Internet Protocol (TCP/IP) and then click on Properties.

4.Click on Use the following IP address.

5.Type in the following IP address: 10.0.0.10.

6.For the Subnet Mask, type: 255.255.255.0.

7.Click OK to close the TCP/IP properties panel.

8.Click OK to close the Network panel and the changes will take effect when this panel is closed.

1.Open a web browser and type in the following address: 10.0.0.1.

2.A login screen should appear. Type the login name: admin and the password: admin.

6

Image 7
Contents Page Introduction Important Safety Information What This Package Contains? Getting start with your Powerline DeviceNecessary Equipment? Equipment that can be used with the TPL-110AP? PC or Laptop Setup GuideTPL-110AP Setup Guide Page Setting up the IP address on the TPL-110AP Page Other Features Page TCP, UDP, ICMP, Igmp Appendix a FeaturesAppendix B Limited Warranty Appendix C FCC Statement Limited Warranty