Hughes manual Installing the DW4020 Manually, Appendix C, Items needed for installation

Appendix C

Installing the DW4020 Manually

Items needed for installation

The installation specification may direct you to install the DW4020 using the serial port. You would connect the installer laptop to the Gateway via the serial ports with a 9-pin female to female (F/F) null modem serial cable. That cable is not included with any DW4020 equipment.

You need all the items shown in Figure 53. Some of them are in the modem installation kit or inside the antenna box. You must provide a 9-pin female/female (F/F) null modem serial cable. The serial cable is used to configure the DW4020 via the serial port. You will also need the installation specification or work order. This is provided to you by HNS.

Read this manual and obtain serial cable and installation work order

l

a

u

n

a

c

m

is

e

h

p

T

S

ll

9-pin F-F serial cable

ta

s

In

Installation manual

Install specification

Ethernet cable

These items are packaged in a small box inside your antenna box

Clips

Receive modem

Transmit modem

Gateway

AC cord

DC cord

25-pin connector cable

USB cable

Power adapter

Power supply

1031105-0001

Figure 53: Items required for installation

Appendix C • Installing the DW4020 Manually 1031484-0001 Revision 2

77