
The Final Test Menu The Final Test Menu is not used by installers. It is used at the factory to ensure the various DW4020 components are functional. The menu is shown below.
Final Test Menu:
(a)LED Test Pattern
(b)Ethernet Ports Test
(c)Modem Signal Test
(d)USB Port Test
(g)Factory Information Read
(z)Return to Main Menu
Figure 88: Final Test Menu
Other options |
| This section describes some other options in the Main Menu. |
Display active routing table | Menu Option (d) displays the current data in the Active | |
|
| Routing Table, shown in Figure 89. This data is |
|
| Main Menu (<?/CR> for options): d |
|
| Active Routing Table: |
|
| Entry Destination Network Gateway Address |
|
| Subnet Mask |
|
| Main Menu (<?/CR> for options): |
|
| Figure 89: Active Routing Table display |
Reset history Menu Option (h) displays the reset history for the DW4020 as | ||
|
| shown in Figure 90. One of the most recent 8 reset logs may be |
|
| displayed. Index 0 is the most recently logged reset. |
Time of Reset | : | THU JAN 01 05:47:35 1970 |
Asserted at | : | t=tInterface ../../../source/sd/cim.c#1918: |
Reset Type | : | Valid Software Reset |
Reset Reason | : | Manual reboot via Install Console rr command |
Figure 90: Reset history
This data is
Note that you reset the DW4020 by typing rr at the Main Menu prompt and pressing Enter. You can force the DW4020 to download new software keys by typing rd and pressing Enter.
Reading factory information
Option (g) displays
This option automatically returns to the Final Test menu.
112
Appendix C • Installing the DW4020 Manually