Figure 26: Antenna Pointing - Receiver

9.Use the Elevation, Azimuth and Polarization values to adjust the antenna to achieve maximum receive signal strength.

10.Select the ACP (auto cross-pol) checkbox. If it is not available, wait five minutes; the system will update.

11.Select Next to go to the Antenna Pointing - Transmitter screen. See Figure 27.

Figure 27: Start manual cross-pol; pass and peak isolation

28

Chapter 2 • Installing the indoor equipment 1031484-0001 Revision 2

Page 40
Image 40
Hughes DW4020 Start manual cross-pol pass and peak isolation