b. Enter DW4020 in the New field.

c. Select OK. The Connect To window appears.

d. Select COM1 from the Connect Using pull-down list (see Figure 74). (Select COM2 is you want to use that port.)

Figure 74: Connect To window

e. Select OK. The COM1 Parameters window appears.

f.Configure the Port Settings by selecting the parameters below from the appropriate pull-down list (see Figure 75).

Bits per second (baud): 9600

Data bits: 8

Parity: none

Stop bits: 1

Flow control: none

Appendix C • Installing the DW4020 Manually 1031484-0001 Revision 2

97

Page 109
Image 109
Hughes DW4020 manual Connect To window