Hughes DW4020 manual How to access the User Interface

How to access the User Interface

The User Interface is accessed through any browser, such as Internet Explorer or Netscape. Follow the steps below to set up an entry for the User Interface in a browser. The steps are written for Internet Explorer or Netscape, but you can use a similar procedure for any browser.

1.Go to Start→Programs→Internet Explorer (or Netscape). The browser interface appears.

2.Place the cursor in the Internet Explorer Address bar or the Netscape Location Bar.

3.Type the DW4020 IP Gateway address. The should have been written this on the front of this manual when the installer finished configuring the unit.

4.Press ENTER. The User Interface Home screen appears. See Figure 32. .

Figure 32: The User Interface Home screen

34

Chapter 3 • The User Interface 1031484-0001 Revision 2