8.Connect up to four Ethernet cables to the network ports on the Gateway (see Figure 60). Either a straight-through or a cross-over Ethernet cable can be used. The four ports labeled 1 through 4 are Ethernet 10 Base - T/100 network ports. They enable you to connect to other computers via an Ethernet connection. (Reference UL 60950, Annex NAA, Subclause reference 6, page 322.)

 

Ethernet card

Receive

Network

cable

modem

 

Transmit

 

modem

 

 

Connect up

 

to four Ethernet

Gateway

cables

 

 

Four 10 Base - T/100 -Tx

 

network ports

T0091012

 

Figure 60: Attach network cables

9.Attach the power supply cords to the power supply and to the power supply adapter. Ensure that the power cord is tightly connected to the power supply, modem, and Gateway (see Figure 61). The final assembly is shown in Figure 62.

Appendix C • Installing the DW4020 Manually 1031484-0001 Revision 2

83

Page 95
Image 95
Hughes DW4020 manual Attach network cables