The power supply DW4020 users must use a power supply with the part number P/N: 1031105-0001. The part number is on a sticker on the power supply. Verify that you are using the correct power supply. Do not use anything but the power supply supplied with the DW4020 system (1031105-0001).

Be sure the power supply is labeled ADP 64AB B in the upper right hand corner of the label, above the bar codes. See Figure 54.

CAUTION

This unit’s performance may suffer if the wrong power supply is used.

This unit must be used with the power supply PN 1031105-0001.

When power needs to be removed from the receive modem, ALWAYS unplug the AC power cord from either the wall outlet, surge protector, or power strip.

NEVER pull the power cord from the back of the receive modem. Doing so could damage the pins and also cause a short in the system.

Power supply with the part number 1031105-0001 is to be used only in the United States and Canada.

This unit must be used with 110-volt AC input.

Other countries may have different standards and requirements.

PN: 1031105-0001

ADP-64AB B

 

Figure 54: PN: 1031105-0001 and ADP-64AB B above bar code

78

Appendix C • Installing the DW4020 Manually 1031484-0001 Revision 2

Page 90
Image 90
Hughes DW4020 manual PN 1031105-0001 and ADP-64AB B above bar code