Hughes DW4020 manual Display Current Configuration Screen

Creation Date:	Feb 8 2002, 11:43:08
Current Gateway Image Executing:	Main.bin
IRU Software Version Number:	33
=======================================================================
Parameter	Value entered	Value in use
--------------------------------------	--------------	------------
VSAT Return Path:	**Inroute	Inroute
Satellite Longitude in degrees:	**117	117
Satellite Longitude in minutes:	**0	0
Satellite Hemisphere:	**West	West
VSAT Longitude in degrees:	*77	77
VSAT Longitude in minutes:	*10	10
VSAT Longitude Hemisphere:	*West	West
VSAT Latitude in degrees:	*39	39
VSAT Latitude in minutes:	*10	10
VSAT Latitude Hemisphere:	*North	North
Satellite Channel Frequency:	*11100 (x 100Khz)	11100 (x 100Khz)
Receive Symbol Rate:	*30000000 Sps	30000000 Sps
LNB Polarization:	*Vertical	Vertical
LNB 22KHz Switch:	*On	On
Filter Rolloff:	*20	20
LAN1 IP Address:	*66.82.56.50	66.82.56.50
LAN1 Subnet Mask:	*255.255.255.240	255.255.255.240
IP Gateway IP Address:	*66.82.24.154	66.82.24.154
SDL Control Channel Multicast Address:	*224.0.1.4	224.0.1.4
VSAT Management IP Address:	*10.0.0.0	10.0.0.0
Default Router IP Address:	10.0.0.10	10.0.0.0
Main Menu (<?/CR> for options):

Figure 80: Display Current Configuration Screen

2.As each one-line parameter appears, enter the specific values as defined in the installation specification for this customer or as specified by HNS personnel and press ENTER. The next parameter will then appear.

Type - and press ENTER at the prompt to go to the previous parameter. You can also skip the remaining parameters by typing \ and pressing ENTER.

Note: The Default Router Address isn’t used in most cases and doesn’t have to be configured. The VSAT Return Path should be configured to "Inroute."

Note: The values in the examples are for illustrative purposes only. Do not use them to configure the Gateway.

102

Appendix C • Installing the DW4020 Manually 1031484-0001 Revision 2