Installation Instructions
INSTALLING THE REFRIGERATOR
REFRIGERATOR LOCATION
•Do not install the refrigerator where
the temperature will go below 60°F (16°C) because it will not run often enough to maintain proper temperatures.
•Do not install the refrigerator where
the temperature will go above 100°F (37°C) because it will not perform properly.
•Install it on a floor strong enough to support it fully loaded.
CLEARANCES
Allow the following clearances for ease
of installation, proper air circulation and plumbing and electrical connections:
|
| 23‘ (33” wide), |
| 23‘/25‘ CustomStyle™ | 25‘, 26‘ |
Sides | 1/8″ (4 mm) | 1/8″ (4 mm) |
Top | 1″ (25 mm) | 1″ (25 mm) |
Back | 1/2″ (13 mm) | 1″ (25 mm) |
DIMENSIONS AND SPECIFICATIONS
| Water | Electrical | |
| 3/4″ (19 mm) |
|
|
| Airspace |
|
|
24″ (61 cm) | (1/2″ [13 mm] Gap + | 25″ (63.5 cm) | |
1/4″ [6 mm] Wall |
| ||
Cabinet |
| Countertop | |
Plates) |
| ||
|
|
| |
DIMENSIONS AND SPECIFICATIONS (for 23‘ CustomStyle™ models)
701⁄4″ (178.4 cm)
36″
(91.4 cm)
24″ (61 cm)
DIMENSIONS AND SPECIFICATIONS (for 25‘ CustomStyle™ models)
721⁄4″ (183.5 cm)*
36″
(91.4 cm)
24″ (61 cm)
*721/4″ (183.5 cm) required for full adjustment of mobility wheels. If cabinets installed above refrigerator have doors that are flush to the top of the opening for the refrigerator, then an additional 1/8″ may be required to provide clearance for cabinet doors to open freely.
28
