ge.com

Problem

 

Possible Causes

What To Do

 

 

 

 

 

 

Frequent “buzzing” sound

 

Icemaker power switch is in the

• Set the power switch to the O (off) position. Keeping it in

 

 

 

I (on) position, but the water supply the I (on) position will damage the water valve.

 

 

 

to the refrigerator has not been

 

 

 

 

connected.

 

 

Ice cubes have odor/taste

 

Ice storage bin needs cleaning.

• Empty and wash bin. Discard old cubes.

 

 

 

 

 

 

 

 

Food transmitting odor/taste

• Wrap foods well.

 

 

 

to ice cubes.

 

 

 

 

 

 

 

 

 

Interior of refrigerator

• See Care and cleaning.

 

 

 

needs cleaning.

 

 

Small or hollow cubes

 

Water filter clogged.

• Replace filter cartridge with new cartridge or with plug.

 

 

 

 

 

 

Slow ice cube freezing

 

Door left open.

• Check to see if package is holding door open.

 

 

 

 

 

 

 

 

Temperature control not set

• See About the controls.

 

 

 

cold enough.

 

 

Cube dispenser

 

Icemaker turned off or

• Turn on icemaker or water supply.

 

does not work

 

water supply turned off.

 

 

 

 

 

 

 

 

 

An item is blocking or has fallen

• Remove any item that might be blocking, or has fallen into

 

 

 

into the ice chute inside the

the chute.

 

 

 

top door bin of the freezer.

 

 

 

 

 

 

 

 

 

Ice cubes are frozen to

• Remove cubes.

 

 

 

icemaker feeler arm.

 

 

 

 

 

 

 

 

 

Irregular ice clumps in

• Break up with fingertip pressure and discard remaining clumps.

 

 

 

storage container.

• Freezer may be too warm. Adjust the freezer control to a

 

 

 

 

 

 

 

 

colder setting, one position at a time, until clumps do not form.

 

 

 

 

 

 

 

 

Dispenser is LOCKED.

• Press and hold the LOCK or LOCK CONTROLS pad for

 

 

 

 

3 seconds.

 

 

 

 

 

 

Water has poor taste/odor

 

Water dispenser has not been

• Dispense water until all water in system is replenished.

 

 

 

used for a long time.

 

 

 

 

 

 

 

Water in first glass

 

Normal when refrigerator

• Wait 24 hours for the refrigerator to completely cool down.

 

is warm

 

is first installed.

 

 

 

 

 

 

 

 

 

Water dispenser has not been

• Dispense water until all water in system is replenished.

 

 

 

used for a long time.

 

 

 

 

 

 

 

 

 

Water system has been drained.

• Allow several hours for replenished supply to chill.

 

 

 

 

 

 

Water dispenser

 

Water supply line turned

• See Installing the water line.

 

does not work

 

off or not connected.

 

 

 

 

 

 

 

 

 

Water filter clogged.

• Replace filter cartridge or remove filter and install plug.

 

 

 

 

 

 

 

 

Air may be trapped in the water system.

• Press the dispenser arm for at least two minutes.

 

 

 

 

 

 

 

 

Dispenser is LOCKED.

• Press and hold the LOCK or LOCK CONTROLS pad for

 

 

 

 

3 seconds.

 

 

 

 

 

 

Water spurting from

 

Newly-installed filter cartridge.

• Run water from the dispenser for 3 minutes

 

dispenser

 

 

(about one and a half gallons).

 

 

 

 

 

 

Water is not dispensed

 

Water in reservoir is

• Call for service.

 

but icemaker is working

 

frozen.

 

 

 

 

 

 

 

 

 

Refrigerator control setting

• Set to a warmer setting.

 

 

 

is too cold.

 

 

No water or ice cube

 

Supply line or shutoff valve is clogged. • Call a plumber.

 

production

 

 

 

 

 

Water filter clogged.

• Replace filter cartridge or remove filter and install plug.

 

 

 

 

 

 

 

 

 

 

 

Dispenser is LOCKED.

• Press and hold the LOCK or LOCK CONTROLS pad for

 

 

 

 

3 seconds.

 

 

 

 

 

 

CUBED ice was selected but

 

Last setting was CRUSHED.

• A few cubes were left in the crusher from the previous

37

CRUSHED ice was dispensed

 

 

setting. This is normal.

 

Safety Instructions Operating Instructions

Instructions

Installation

Troubleshooting Tips Consumer Support

Page 37
Image 37
GE 26, 25 Connected, Storage container, Dispenser is Locked, Seconds, Water dispenser has not been, Used for a long time

23, 26, 25 specifications

The GE 25, officially known as the General Electric 25 (GE 25), is a revolutionary advanced gas turbine designed to enhance the efficiency and productivity of power generation. This cutting-edge turbine is engineered with an eye towards meeting the evolving demands of the energy market while ensuring environmental sustainability.

One of the primary features of the GE 25 is its highly efficient combustion process. Utilizing advanced combustion technology, the turbine achieves lower emissions of nitrogen oxides (NOx) while maintaining a high power output. The GE 25 is designed for use in both simple cycle and combined cycle power plants, making it a versatile choice for various energy generation applications. The turbine's ability to transition seamlessly between these cycles allows operators to optimize energy production based on demand.

The GE 25 is built with advanced materials that enhance durability and performance. The components are constructed from high-temperature alloys that withstand extreme operating conditions, thus ensuring longevity and lower maintenance costs. This durability is crucial as it minimizes downtime and maximizes productivity in power generation facilities.

Innovative technologies incorporated into the GE 25 include advanced aerodynamics and an intelligent control system. The turbine features an optimized blade design that improves airflow efficiency and reduces drag, resulting in higher overall performance. Additionally, the intelligent control system offers real-time monitoring and analysis, enabling predictive maintenance and ensuring that the turbine operates at peak efficiency.

The turbine's modular design simplifies installation and maintenance processes. This allows for faster commissioning times and enhances operational flexibility, making it a preferred choice for both new installations and retrofitting older plants. The GE 25 is also compatible with a wide range of fuel types, including natural gas, biogas, and even hydrogen blends, which aligns with the industry's shift towards more sustainable energy sources.

In summary, the GE 25 stands out as a powerhouse in the gas turbine industry, with its cutting-edge features, advanced technologies, and robust characteristics. By prioritizing efficiency, durability, and flexibility, the GE 25 meets the current and future energy needs while contributing to a greener planet. As the demand for reliable and sustainable energy sources continues to grow, the GE 25 will play a vital role in shaping the future of power generation.