Instructions
About the shelves and bins.
Not all features are on all models.
Snugger
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Operating Instructions Safety
Freezer
The larger refrigerator door bins and freezer
To remove: Lift the front of the bin straight up, then lift up and out.
To replace or relocate: Engage the back side of the bin in the molded supports on the door. Then push down on the front of the bin.
Bin will lock in place.
The snugger helps prevent tipping, spilling or sliding of small items stored on the door shelf. Place a finger on either side of the snugger near the rear and move it back and forth
to fit your needs.
Do not block
Top freezer binDo not block
CAUTION:
Be careful when placing items in the top bin. Make sure that items do not block or fall into the ice chute.
CAUTION: Part must be in place as shown for proper ice dispensing. Food cannot be stored in this location.
Slide-Out Spillproof Shelf
The
To remove:
Slide the shelf out until it reaches the stop, then press down on the tab and slide the shelf straight out.
To replace or relocate:
Line the shelf up with the supports and slide it into place. The shelf can be repositioned when the door is at 90° or more. To reposition the shelf, slide the shelf past the stops and angle downward. Slide shelf down to the desired position, line up with the supports and slide into place.
Make sure you push the shelves all the way back in before you close the door.
Consumer Support Troubleshooting Tips
QuickSpace™ Shelf
This shelf splits in half and slides under itself for storage of tall items on the shelf below.
This shelf can be removed and replaced or relocated just like
On some models, this shelf cannot be used in the lowest position.
10