TRENDnet TVP- 221H, VoIP Gateway manual Features, Networking Protocols

Page 10

TVP-221H User’s1Guide

Chapter 1

Overview

This chapter gives an overview of the 4 ports desktop version VoIP Gateway (TVP-221H) and a detailed description of its front panel and rear panel.

1.1Features

The TVP-221H is a cost-effective and highly reliable analog Voice over IP (VoIP) Gateway that offers toll quality voice and real-time fax data over IP networks. With its embedded architecture, the gateway is ideal for VoIP applications associated with Remote Office and Branch Office (ROBO) environments. With its built-in user-friendly interface, the gateway may be installed easily and conveniently to yield immediate cost savings. One VoIP Gateway supports up to four voice or Fax communications simultaneously.

Implemented with an efficient Real-Time Operating System (RTOS) and flash memory, the TVP-221H provides upgradeable capabilities, so it may be programmed with updated firmware locally or via the network at any time. It comes equipped with remote management capabilities, configurable signaling to work with PBX, KTS, and/or telephone. The TVP-221H utilizes advanced VoIP related technology. It includes various voice codecs and fax algorithms, echo cancellation, Voice Activity Detection (VAD) , Comfort Noise Generation (CNG) , and lost packet recovery algorithms.

1.2Networking Protocols

The TVP-221H supports several industry-standard networking protocols required for voice communication. The following table describes these protocols.

Networking Protocol

Description

Internet Protocol (IP)

IP is a messaging protocol that addresses and sends packets

 

across the network. To enable IP protocol, the TVP-221H

 

must have a Real IP address, subnet, and gateway assigned

 

to it.

Voice over IP Protocol

VoIP enables the TVP-221H to transfer voice

(VoIP)

communications over an IP network. The TVP-221H

 

employs ITU-T H.323 protocol for setting up calls with

 

one another.

Trivial File Transfer

TFTP allows you to transfer files over the network. The

Protocol (TFTP)

TVP-221H implements a TFTP client allowing you to

 

download new revision firmware from a TFTP server. The

 

TFTP client requires a TFTP server in your network.

Real-Time Transport

RTP is a standard for transporting real-time data over IP

(RTP)

network. The TVP-221H uses RTP protocol to send

 

digitized and compressed voice packets.

10

Image 10
Contents Page FCC Notice CE Declaration of conformity How to Use This Manual TVP-221H 323TVP-224HR Convention Description BoldfaceTable of Contents Configuring TVP-221H from a WEB Browser Chapter TVP-221H User’s GuideTVP-221H User’s Guide Features Networking ProtocolsPackage Contents Front PanelIndicator Color Activity Indication Reset ButtonRear Panel LAN / Console Ports Port Label FunctionConnecting to the Network Installing the TVP-221HConnecting to the telephony devices Network RequirementsProviding Power to the TVP-221H Assigning an IP address to the TVP-221HAtpm How the TVP-221H OperatesDestination Hunt Group Address TableDestination Table Dtmf RelayHunt Group Table Address Hunt Min Entry GrpId DigitsVoice Codecs Http setting mode PC SetupSpecify an IP address set on Main Menu Function Briefings System Status Internet AccessSelect Home Fixed IP Connection Details Data Fixed IP address ScreenDhcp Client PPPoEDynamic DNS Dynamic DNS ScreenData Dynamic DNS Screen H.323 ConfigurationStatus Parameters Gatekeeper DNS IP Address Alternate Dtmf IP AddressPage Aliases Telephone Number Table Dial Plan SettingsDial Plan Setup Telephone Table Hunt Group Table Destination TableParameter Description Destination ID Table Dial in Plar / CID Data Dial in Plar / CID ScreenStore Dial Plan Dial in Plar Considerations and LimitationsLine Settings Restore Dial PlanClear Dial Plan Administration Channel ParametersData Administration Password Setup Administration Password Setup / LoginData Telnet Access Screen Remote AdministrationData Upgrade Firmware Screen Upgrading Firmware Using the Web BrowserTo perform the Firmware Upgrade Help Click on OK RebootChannel Status Interface SpeedNetwork Configuration ExamplesDefault Dial Plan Dial PlanMaking a call with TVP-221H FXS Port HintWeb Browser Sample Dial Plan Making a call with TVP-221H FXO PortConnection Analogue PBX connects to FXO port 800 Gateway a IP setup Click on Ok Gateway a and Gateway B Dial Plan Tables Hunt Group ID Hunt Type # of Dest IDs Hunt Group ID Hunt Type # of Dest IDs Dest. IDs Making a call between Gateway a and Gateway B Case 1 Gateway Phone to Gateway PhoneCase 2 Gateway Phone to Pstn Phone Case 3 Pstn Phone to Gateway PhoneVoIP in a Dynamic IP environment PPPoE, DHCP, and Ddns clientsDial Plan Local from PC in same Segment Console Local Telnet from PC in same SegmentEnter telnet Enter Username admin Net set pppoe on Atpm dadd destid dns Local Telnet from PC in sameNet set dhcp on. net set dyndns on NAT router with built-in Ddns client TVP-221H User’s GuidePlease note the following regarding DMZ configuration TVP-221H User’s Guide Virtual Servers Menu Properties EnableClick on Save PC ServerWeb Configuration Console / Telnet Network Deployment Enter telnet tvp1.dyndns.org Atpm done Connect RS-232 to TVP-224HR Atpm hadd 11 2 Case Scenario Case 6 Plar Hotline FXO to FXS exampleSite a TVP Gateway configuration FXO to FXS Plar Site a Case 7 Plar Hotline FXS to FXO exampleSite B TVP Gateway Configuration FXS to FXO Plar Case 8 Plar Hotline FXO to FXO exampleSite a TVP Gateway Configuration FXO to FXO Plar Atpm dadd 20 h323 FXS Foreign Exchange Station Port ConfigurationFXO Foreign Exchange Office Application 1 Special FXS Connections Application 2 FXO ConnectionsThere is no dial tone when pick up the phone Power PWR LED is not illuminateLine port LED is not illuminate when pick up the phone LNK LED is not illuminateFinal Steps Appendix a Technical Specifications TVP-221H Technical SpecificationsTelephony Line Module Specifications FXO PortsConsole Port DB-9 pin SignalRJ45 pin Signal LAN PortFXO Port Pin Assignments RJ-11 pin SignalFXS Port Pin Assignments Net set userpw pw pw Ping xxx.xxx.xxx.xxx 56 data bytes xxx.xxx.xxx.xxx is alive Appendix C Connecting Through Telnet Normal Mode Commands Command DescriptionDownload Mode Commands Serial port Fixed Appendix E Factory Default SettingsParameter Default Setting 323Voice codec TelephonyLocal Destinations Port# Mode Destination IDAppendix F Worksheets IP ParametersIP address IP port Mode Destination ID Optional Remote DestinationsAtpm Hunt Group Table Hunt Group Hunt Type List of Destination IDsAtpm aadd tel# mindigits maxdigits huntgroupid Atpm Address TableAtpm TNV Limited Warranty Year Warranty TVP-221H User’s Guide 100

VoIP Gateway, TVP- 221H specifications

The TRENDnet TVP-221H is a robust VoIP Gateway designed for seamless communication in both residential and small business environments. This device is engineered to facilitate the transmission of voice calls over the internet, leveraging Voice over Internet Protocol (VoIP) technology to enhance communication efficiency and reduce costs associated with traditional telephony.

One of the standout features of the TVP-221H is its dual FXS ports, which allow users to connect standard analog phones or fax machines directly to the gateway. This ensures compatibility with existing equipment, providing a smooth transition from conventional phone services to VoIP solutions. The device supports a wide range of codecs including G.711, G.723, G.726, and G.729, ensuring high-quality, clear voice transmission suitable for various bandwidth requirements.

The TRENDnet TVP-221H also boasts an intuitive web-based interface, making it easy for users to configure and manage their VoIP settings. This feature provides accessibility for remote management, enabling quick adjustments to settings and ensuring that the system is always optimized for performance. In addition, the gateway supports advanced call features such as call waiting, caller ID, and call forwarding, enhancing overall user experience and functionality.

In terms of security, the device incorporates support for SIP TLS and SRTP, providing encryption for signaling and media streams respectively. This ensures that voice communications are kept secure from potential eavesdropping or tampering, critical in today's digital landscape where privacy is a priority.

The TRENDnet TVP-221H is also designed with quality of service (QoS) features to prioritize voice traffic, ensuring smooth call performance even in environments with heavy internet usage. It also supports automatic provisioning and firmware upgrades, simplifying updates and maintenance workflows.

With its compact design, the device can be easily mounted on a wall or placed on a desk, offering flexibility in installation. Its low power consumption and efficient operation also make it an eco-friendly choice for businesses looking to minimize their energy footprint while enhancing communication capabilities.

In summary, the TRENDnet TVP-221H VoIP Gateway is an essential tool for modern communication, providing reliable performance, advanced features, and a user-friendly experience. Its combination of security, call management capabilities, and ease of use makes it a top choice for anyone looking to improve their telephony solutions.