TRENDnet TVP- 221H, VoIP Gateway manual Data Telnet Access Screen, Remote Administration

Page 40

TVP-221H User’s Guide

Enter the default "User Name" and the "Password" you set on the Administration Password Setup screen above.

Remote Administration

Remote Administration allows you to connect to this interface via the Internet, using your Web browser or Telnet. By default, both services are activated.

Data – Telnet Access Screen

Information

Information

To establish a connection from the Internet using Telnet:

 

1.

Enable the Telnet Server.

 

2.

From Windows command prompt

 

3.

Enter “telnet 192.168.0.1”

 

4.

Enter Username “admin”

 

5.

Enter “123”

 

 

 

Settings

Telnet

Check this to allow Telnet administration/management via the Internet. (To connect, see above).

If Disabled, this device will ignore management connection attempts

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Page FCC Notice CE Declaration of conformity How to Use This Manual TVP-221H 323TVP-224HR Convention Description BoldfaceTable of Contents Configuring TVP-221H from a WEB Browser Chapter TVP-221H User’s GuideTVP-221H User’s Guide Features Networking ProtocolsPackage Contents Front PanelIndicator Color Activity Indication Reset ButtonRear Panel LAN / Console Ports Port Label FunctionInstalling the TVP-221H Connecting to the telephony devicesConnecting to the Network Network RequirementsProviding Power to the TVP-221H Assigning an IP address to the TVP-221HAtpm How the TVP-221H OperatesDestination Hunt Group Address TableDtmf Relay Hunt Group TableDestination Table Address Hunt Min Entry GrpId DigitsVoice Codecs Http setting mode PC SetupSpecify an IP address set on Main Menu Function Briefings System Status Internet AccessSelect Home Fixed IP Connection Details Data Fixed IP address ScreenDhcp Client PPPoEDynamic DNS Dynamic DNS ScreenData Dynamic DNS Screen H.323 ConfigurationStatus Parameters Gatekeeper DNS IP Address Alternate Dtmf IP AddressPage Aliases Dial Plan Settings Dial Plan SetupTelephone Number Table Telephone Table Hunt Group Table Destination TableParameter Description Destination ID Table Dial in Plar / CID Data Dial in Plar / CID ScreenStore Dial Plan Dial in Plar Considerations and LimitationsLine Settings Restore Dial PlanClear Dial Plan Administration Channel ParametersData Administration Password Setup Administration Password Setup / LoginData Telnet Access Screen Remote AdministrationData Upgrade Firmware Screen Upgrading Firmware Using the Web BrowserTo perform the Firmware Upgrade Click on OK Reboot Channel StatusHelp Interface SpeedConfiguration Examples Default Dial PlanNetwork Dial PlanMaking a call with TVP-221H FXS Port HintWeb Browser Sample Dial Plan Making a call with TVP-221H FXO PortConnection Analogue PBX connects to FXO port 800 Gateway a IP setup Click on Ok Gateway a and Gateway B Dial Plan Tables Hunt Group ID Hunt Type # of Dest IDs Hunt Group ID Hunt Type # of Dest IDs Dest. IDs Making a call between Gateway a and Gateway B Case 1 Gateway Phone to Gateway PhoneCase 2 Gateway Phone to Pstn Phone Case 3 Pstn Phone to Gateway PhoneVoIP in a Dynamic IP environment PPPoE, DHCP, and Ddns clientsDial Plan Local from PC in same Segment Console Local Telnet from PC in same SegmentEnter telnet Enter Username admin Net set pppoe on Atpm dadd destid dns Local Telnet from PC in sameNet set dhcp on. net set dyndns on NAT router with built-in Ddns client TVP-221H User’s GuidePlease note the following regarding DMZ configuration TVP-221H User’s Guide Properties Enable Click on SaveVirtual Servers Menu PC ServerWeb Configuration Console / Telnet Network Deployment Enter telnet tvp1.dyndns.org Atpm done Connect RS-232 to TVP-224HR Atpm hadd 11 2 Case Scenario Case 6 Plar Hotline FXO to FXS exampleSite a TVP Gateway configuration FXO to FXS Plar Site a Case 7 Plar Hotline FXS to FXO exampleSite B TVP Gateway Configuration FXS to FXO Plar Case 8 Plar Hotline FXO to FXO exampleSite a TVP Gateway Configuration FXO to FXO Plar Atpm dadd 20 h323 FXS Foreign Exchange Station Port ConfigurationFXO Foreign Exchange Office Application 1 Special FXS Connections Application 2 FXO ConnectionsPower PWR LED is not illuminate Line port LED is not illuminate when pick up the phoneThere is no dial tone when pick up the phone LNK LED is not illuminateFinal Steps Appendix a Technical Specifications TVP-221H Technical SpecificationsTelephony Line Module Specifications FXO PortsDB-9 pin Signal RJ45 pin SignalConsole Port LAN PortFXO Port Pin Assignments RJ-11 pin SignalFXS Port Pin Assignments Net set userpw pw pw Ping xxx.xxx.xxx.xxx 56 data bytes xxx.xxx.xxx.xxx is alive Appendix C Connecting Through Telnet Normal Mode Commands Command DescriptionDownload Mode Commands Appendix E Factory Default Settings Parameter Default SettingSerial port Fixed 323Voice codec TelephonyPort# Mode Destination ID Appendix F WorksheetsLocal Destinations IP ParametersIP address IP port Mode Destination ID Optional Remote DestinationsAtpm Hunt Group Table Hunt Group Hunt Type List of Destination IDsAtpm aadd tel# mindigits maxdigits huntgroupid Atpm Address TableAtpm TNV Limited Warranty Year Warranty TVP-221H User’s Guide 100

VoIP Gateway, TVP- 221H specifications

The TRENDnet TVP-221H is a robust VoIP Gateway designed for seamless communication in both residential and small business environments. This device is engineered to facilitate the transmission of voice calls over the internet, leveraging Voice over Internet Protocol (VoIP) technology to enhance communication efficiency and reduce costs associated with traditional telephony.

One of the standout features of the TVP-221H is its dual FXS ports, which allow users to connect standard analog phones or fax machines directly to the gateway. This ensures compatibility with existing equipment, providing a smooth transition from conventional phone services to VoIP solutions. The device supports a wide range of codecs including G.711, G.723, G.726, and G.729, ensuring high-quality, clear voice transmission suitable for various bandwidth requirements.

The TRENDnet TVP-221H also boasts an intuitive web-based interface, making it easy for users to configure and manage their VoIP settings. This feature provides accessibility for remote management, enabling quick adjustments to settings and ensuring that the system is always optimized for performance. In addition, the gateway supports advanced call features such as call waiting, caller ID, and call forwarding, enhancing overall user experience and functionality.

In terms of security, the device incorporates support for SIP TLS and SRTP, providing encryption for signaling and media streams respectively. This ensures that voice communications are kept secure from potential eavesdropping or tampering, critical in today's digital landscape where privacy is a priority.

The TRENDnet TVP-221H is also designed with quality of service (QoS) features to prioritize voice traffic, ensuring smooth call performance even in environments with heavy internet usage. It also supports automatic provisioning and firmware upgrades, simplifying updates and maintenance workflows.

With its compact design, the device can be easily mounted on a wall or placed on a desk, offering flexibility in installation. Its low power consumption and efficient operation also make it an eco-friendly choice for businesses looking to minimize their energy footprint while enhancing communication capabilities.

In summary, the TRENDnet TVP-221H VoIP Gateway is an essential tool for modern communication, providing reliable performance, advanced features, and a user-friendly experience. Its combination of security, call management capabilities, and ease of use makes it a top choice for anyone looking to improve their telephony solutions.
Top Page Image Contents