TRENDnet TVP- 221H, VoIP Gateway manual Please note the following regarding DMZ configuration

Page 62

TVP-221H User’s Guide

TVP-221H can be configured with a Router. In this example, Trendwares TEW- 431BRP is used.

Internet Access

In addition to fixed IP, the TEW-431BRP can be configured to use PPPoE or DHCP clients. With PPPoE and DHCP, you will have a Dynamic IP but combined with Dynamic DNS, the TEW-431BRP will automatically notify DynDNS of your changing IP Address and DynDNS will in turn, map it to your registered Domain Name. Assuming the above has been done, we can configure the TVP-221H

Note: The following installation method takes into consideration that both the TEW-

431BRP and the TVP-221H have the same default IP address: 192.168.0.1. Please note that the TEW-431BRP DHCP Server start IP Address and finish IP Address fields set the values used by the DHCP server when allocating IP Addresses to DHCP clients. Please set the DHCP Server values to avoid conflict with the Fixed IP addresses assigned to the TVP-221H A (192.168.0.20) and TVP-221H B (192.168.0.55)

The first time you connect to the TVP-221H for web configuration, you will need to connect to it under the same LAN segment. To configure the TVP-221H, insert one end of an Ethernet cable into the RJ45 LAN port of the TVP-221H and the other end directly to your configuring PC.

Once Internet Access has been configured (See below), you can disconnect the cable from the PC and reconnect it to one of the LAN ports of the TEW-431BRP. Connect your PC to one of the remaining 3 Hub ports. By default, the TEW-431BRP’s DHCP server is enabled. Make sure your computer is DHCP client enabled or has a Fixed IP not used by any other devices on the LAN. If using a Fixed IP, make sure it is also in the same LAN segment.. See Chapter 4 for more information. The TEW-431BRP and the TVP-221H both support auto-MDIX so a Standard Cat 5 cable will be sufficient.

Network Configuration

In this case application, the Trendware TEW-431BRP can be set up to use Virtual Servers or DMZ, and DDNS Client Support

1.The TEW-431BRP supports Virtual Servers and DMZ allowing you to connect a device / server you wish to make available to the public. Using a standard RJ45 cable, connect your TVP-221H LAN port to a TEW-431BRP LAN port.

Please note the following regarding DMZ configuration.

•Devices connected to a LAN port are in the same LAN segment as PCs connected to the other LAN ports. They must use the same IP address range.

2.Select Internet on the main menu, then Dynamic DNS, to see a screen like the following

62

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Page FCC Notice CE Declaration of conformity How to Use This Manual TVP-224HR 323TVP-221H Convention Description BoldfaceTable of Contents Configuring TVP-221H from a WEB Browser Chapter TVP-221H User’s GuideTVP-221H User’s Guide Features Networking ProtocolsPackage Contents Front PanelRear Panel Reset ButtonIndicator Color Activity Indication LAN / Console Ports Port Label FunctionConnecting to the Network Installing the TVP-221HConnecting to the telephony devices Network RequirementsProviding Power to the TVP-221H Assigning an IP address to the TVP-221HDestination How the TVP-221H OperatesAtpm Hunt Group Address TableDestination Table Dtmf RelayHunt Group Table Address Hunt Min Entry GrpId DigitsVoice Codecs Http setting mode PC SetupSpecify an IP address set on Main Menu Function Briefings Select Home Internet AccessSystem Status Fixed IP Connection Details Data Fixed IP address ScreenDhcp Client PPPoEDynamic DNS Dynamic DNS ScreenStatus H.323 ConfigurationData Dynamic DNS Screen Parameters Gatekeeper DNS IP Address Alternate Dtmf IP AddressPage Aliases Telephone Number Table Dial Plan SettingsDial Plan Setup Telephone Table Hunt Group Table Destination TableParameter Description Destination ID Table Dial in Plar / CID Data Dial in Plar / CID ScreenStore Dial Plan Dial in Plar Considerations and LimitationsClear Dial Plan Restore Dial PlanLine Settings Administration Channel ParametersData Administration Password Setup Administration Password Setup / LoginData Telnet Access Screen Remote AdministrationData Upgrade Firmware Screen Upgrading Firmware Using the Web BrowserTo perform the Firmware Upgrade Help Click on OK RebootChannel Status Interface SpeedNetwork Configuration ExamplesDefault Dial Plan Dial PlanMaking a call with TVP-221H FXS Port HintConnection Analogue PBX connects to FXO port Making a call with TVP-221H FXO PortWeb Browser Sample Dial Plan 800 Gateway a IP setup Click on Ok Gateway a and Gateway B Dial Plan Tables Hunt Group ID Hunt Type # of Dest IDs Hunt Group ID Hunt Type # of Dest IDs Dest. IDs Making a call between Gateway a and Gateway B Case 1 Gateway Phone to Gateway PhoneCase 2 Gateway Phone to Pstn Phone Case 3 Pstn Phone to Gateway PhoneVoIP in a Dynamic IP environment PPPoE, DHCP, and Ddns clientsDial Plan Local from PC in same Segment Console Local Telnet from PC in same SegmentEnter telnet Enter Username admin Net set pppoe on Atpm dadd destid dns Local Telnet from PC in sameNet set dhcp on. net set dyndns on NAT router with built-in Ddns client TVP-221H User’s GuidePlease note the following regarding DMZ configuration TVP-221H User’s Guide Virtual Servers Menu Properties EnableClick on Save PC ServerWeb Configuration Console / Telnet Network Deployment Enter telnet tvp1.dyndns.org Atpm done Connect RS-232 to TVP-224HR Atpm hadd 11 2 Case Scenario Case 6 Plar Hotline FXO to FXS exampleSite a TVP Gateway configuration FXO to FXS Plar Site a Case 7 Plar Hotline FXS to FXO exampleSite B TVP Gateway Configuration FXS to FXO Plar Case 8 Plar Hotline FXO to FXO exampleSite a TVP Gateway Configuration FXO to FXO Plar Atpm dadd 20 h323 FXO Foreign Exchange Office Port ConfigurationFXS Foreign Exchange Station Application 1 Special FXS Connections Application 2 FXO ConnectionsThere is no dial tone when pick up the phone Power PWR LED is not illuminateLine port LED is not illuminate when pick up the phone LNK LED is not illuminateFinal Steps Appendix a Technical Specifications TVP-221H Technical SpecificationsTelephony Line Module Specifications FXO PortsConsole Port DB-9 pin SignalRJ45 pin Signal LAN PortFXS Port Pin Assignments RJ-11 pin SignalFXO Port Pin Assignments Net set userpw pw pw Ping xxx.xxx.xxx.xxx 56 data bytes xxx.xxx.xxx.xxx is alive Appendix C Connecting Through Telnet Normal Mode Commands Command DescriptionDownload Mode Commands Serial port Fixed Appendix E Factory Default SettingsParameter Default Setting 323Voice codec TelephonyLocal Destinations Port# Mode Destination IDAppendix F Worksheets IP ParametersIP address IP port Mode Destination ID Optional Remote DestinationsAtpm Hunt Group Table Hunt Group Hunt Type List of Destination IDsAtpm aadd tel# mindigits maxdigits huntgroupid Atpm Address TableAtpm TNV Limited Warranty Year Warranty TVP-221H User’s Guide 100

VoIP Gateway, TVP- 221H specifications

The TRENDnet TVP-221H is a robust VoIP Gateway designed for seamless communication in both residential and small business environments. This device is engineered to facilitate the transmission of voice calls over the internet, leveraging Voice over Internet Protocol (VoIP) technology to enhance communication efficiency and reduce costs associated with traditional telephony.

One of the standout features of the TVP-221H is its dual FXS ports, which allow users to connect standard analog phones or fax machines directly to the gateway. This ensures compatibility with existing equipment, providing a smooth transition from conventional phone services to VoIP solutions. The device supports a wide range of codecs including G.711, G.723, G.726, and G.729, ensuring high-quality, clear voice transmission suitable for various bandwidth requirements.

The TRENDnet TVP-221H also boasts an intuitive web-based interface, making it easy for users to configure and manage their VoIP settings. This feature provides accessibility for remote management, enabling quick adjustments to settings and ensuring that the system is always optimized for performance. In addition, the gateway supports advanced call features such as call waiting, caller ID, and call forwarding, enhancing overall user experience and functionality.

In terms of security, the device incorporates support for SIP TLS and SRTP, providing encryption for signaling and media streams respectively. This ensures that voice communications are kept secure from potential eavesdropping or tampering, critical in today's digital landscape where privacy is a priority.

The TRENDnet TVP-221H is also designed with quality of service (QoS) features to prioritize voice traffic, ensuring smooth call performance even in environments with heavy internet usage. It also supports automatic provisioning and firmware upgrades, simplifying updates and maintenance workflows.

With its compact design, the device can be easily mounted on a wall or placed on a desk, offering flexibility in installation. Its low power consumption and efficient operation also make it an eco-friendly choice for businesses looking to minimize their energy footprint while enhancing communication capabilities.

In summary, the TRENDnet TVP-221H VoIP Gateway is an essential tool for modern communication, providing reliable performance, advanced features, and a user-friendly experience. Its combination of security, call management capabilities, and ease of use makes it a top choice for anyone looking to improve their telephony solutions.
Top Page Image Contents