TRENDnet TEW805UB manual How to find your IP address?, Windows 2000/XP/Vista/7/8

TRENDnet User’s Guide TEW-805UB

How to find your IP address?

Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for configuring network settings.

Windows 2000/XP/Vista/7/8

1.On your keyboard, press Windows Logo+R keys simultaneously to bring up the Run dialog box.

2.In the dialog box, type cmd to bring up the command prompt.

3.In the command prompt, type ipconfig /all to display your IP address settings.

How to configure your network settings to obtain an IP address automatically or use DHCP?

Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for configuring network settings.

Windows 7/8

a. Go into the Control Panel, click Network and Sharing Center.

b. Click Change Adapter Settings, right-click the Local Area Connection icon. c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4). d. Then click Obtain an IP address automatically and click OK.

Windows Vista

a. Go into the Control Panel, click Network and Internet.

b. Click Manage Network Connections, right-click the Local Area Connection icon and click Properties.

c. Click Internet Protocol Version (TCP/IPv4) and then click Properties. d. Then click Obtain an IP address automatically and click OK.

Windows XP/2000

a. Go into the Control Panel, double-click the Network Connections icon b. Right-click the Local Area Connection icon and the click Properties.

c. Click Internet Protocol (TCP/IP) and click Properties.

d. Then click Obtain an IP address automatically and click OK.

How to find your MAC address?

In Windows 2000/XP/Vista/7

Your computer MAC addresses are also displayed in this window, however, you can type getmac –vto display the MAC addresses only.

How to connect to a wireless network using the built-in Windows utility?

Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for connecting to a wireless network using the built-in utility.

Windows 7/8

1.Open Connect to a Network by clicking the network icon ( or ) in the notification area.

2.In the list of available wireless networks, click the wireless network you would like to connect to, then click Connect.

4.You may be prompted to enter a security key in order to connect to the network.

5.Enter in the security key corresponding to the wireless network, and click OK.

Windows Vista

1.Open Connect to a Network by clicking the Start Button. and then click Connect

To.

2.In the Show list, click Wireless.

3.In the list of available wireless networks, click the wireless network you would like to connect to, then click Connect.

4.You may be prompted to enter a security key in order to connect to the network.

5.Enter in the security key corresponding to the wireless network, and click OK.

© Copyright 2013 TRENDnet. All Rights Reserved.

14