Xantrex Technology Powerpack 300 manual Jump-Starting a Vehicle’s Engine

Page 33

Jump-Starting a Vehicle’s Engine

If no alarm sounds, and the Green Jumpstart Connection LED is illuminated, then proceed to the next step.

7.Switch ON the jump-starting power switch. Before starting the engine, make sure the XPower Powerpack and the cables are clear of belts and fans.

8.Crank the engine for 4 seconds or until it starts, whichever is first.

WARNING: Fire hazard

Do not crank the engine for more than 4 seconds. The jump-start feature is designed for short term operation only. Operating the jump-start feature for more than 4 seconds may cause damage to the unit. Allow the XPower Powerpack to cool down for at least 3 minutes after each jump-start.

9.Switch OFF the jump-starting power switch.

10.Remove the red positive (+) clamp and then the black negative (–) clamp from the vehicle.

11.Store the jump-start clamps in the appropriate holder on each side of the XPower Powerpack.

Important: Recharge the XPower Powerpack as soon as possible after each use. See “Recharging the XPower Powerpack Battery” on page 28.

20

Image 33
Contents XPower Powerpack Emergency Power XPower Powerpack Date and Revision Organization PurposeAbbreviations and Acronyms Conventions UsedImportant Safety Instructions Important Safety Information Important Safety Information Precautions When Working With Your Vehicle Battery Vii Precautions for Using Rechargeable Appliances Contents Maintenance TroubleshootingSpecifications Comprehensive Protection About the XPower PowerpackAutomatic Overload OverheatingLow Battery Protection Materials List FeaturesXPower Powerpack Features Feature DescriptionFront Panel Detail Not Left Side View Accessory Description AccessoriesPage Operating Conditions and Guidelines OperationChoosing a Location To recharge with the AC charger Recharging with the AC ChargerRecharging with the AC Charger To recharge the flashlight from the XPower Powerpack Using the FlashlightOperating AC Appliances Understanding AC AppliancesAC Appliance Watts a Hours b High Surge Appliances To operate an AC appliance Operating an AC ApplianceDC Appliance Watts a Hours b Operating 12 V DC AppliancesTo operate a 12 V DC appliance Jump-Starting a Vehicle’s EngineTo jump-start a vehicle or boat engine Jump-Starting a Vehicle’s Engine Over-temperature Safety Protection Using the Air CompressorTo inflate your vehicle, motorcycle, or bicycle tires Inflating TiresTo inflate small sports equipment Inflating Small Sports EquipmentConnecting to an External Battery Connecting to an External Battery Page Battery Maintenance MaintenanceRecharging with the AC Charger Recharging the XPower Powerpack BatteryTo recharge with the AC charger Recharging with the DC Charging Cable Recharging the XPower Powerpack Battery Recharging with a Generator’s Regulated 12 V DC Outlet Recharging from a Solar Panel To wire the coaxial DC connectorRecycling Common Problems Buzz in Audio EquipmentTelevision Interference Problem Possible Cause Solution Troubleshooting ReferenceTroubleshooting Reference 1Troubleshooting reference Switch on Page DC Section Electrical SpecificationsInternal Battery Charging Controller System AC Power SectionAccessories Physical SpecificationsPhysical specifications XPower Powerpack Physical specifications Internal SW12120 batteryPage Warranty Warranty and ReturnDisclaimer ProductExclusions Return Procedure Return Material Authorization PolicyInformation About Your System Out of Warranty Service