Transition Networks SISTP10XX-141-LR(T) installation manual Fiber cable and optic specifications

Transition Networks SISTP10xx-141-LR(T) Industrial PoE Switch

Fiber cable and optic specifications

Fiber cable	Cable physical characteristics must meet or exceed IEEE 802.3™ specifications.
characteristics
	Parameter	Specification
	Bit Error Rate:	<10-9
	Single mode fiber:	9 µm
	Multimode fiber:	62.5/125 µm
	Multimode fiber:	100/140, 85/140, 50/125 µm
Fiber optic	The following shows the fiber optic specification:
specifications
	Fiber Cable	Specifications

SISTP1011-141-LR(T)

Fiber-optic transmitter power: Fiber-optic receiver sensitivity: Link budget:

SISTP1013-141-LR(T)

Fiber-optic transmitter power: Fiber-optic receiver sensitivity: Link budget:

SISTP1014-141-LR(T)

Fiber-optic transmitter power: Fiber-optic receiver sensitivity: Link budget:

1300 nm multimode
min: -20.0 dBm	max: -14.0 dBm
min: -31.0 dBm	max:	0.0 dBm
11.0dB
1300 nm multimode
min: -20.0 dBm	max: -14.0 dBm
min: -31.0 dBm	max:	0.0 dBm
11.0dB
1310 nm single mode
min: -15.0 dBm	max: -8.0 dBm
min: -32.0 dBm	max: -5.0 dBm
17.0 dB

Note: The fiber optic transmitters on this device meet Class I Laser safety requirements per IEC-825/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11.

24 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600