Transition Networks |
Cautions and warnings
Cautions and Make sure that you read and understand all content identified by these two symbols: warnings
Cautions and warnings appear here and throughout this manual where appropriate. Failure to read and understand the information identified by the “caution” and “warning” symbols could result in poor equipment performance, damage to equipment, or injury to persons.
Cautions | Cautions indicate the possibility of damage to equipment. |
CAUTION
Make sure that the Industrial PoE Switch is mounted with proper space around it for ventilation (heat dissipation). Failure to observe this caution could result in damage to the Industrial PoE Switch.
CAUTION
Please exercise caution when using power tools. Do not install this unit in damp or wet locations, or in close proximity to very hot surfaces. Failure to observe this caution could result in damage to the Industrial PoE Switch and cables.
CAUTION
Only qualified persons should install the Industrial PoE Switch. Failure to observe this caution could result in poor performance or damage to the Industrial PoE Switch.
CAUTION
Install the Industrial PoE Switch in an environment where the temperature range will not exceed the stated environmental specifications for the particular model being installed. Failure to observe this caution could result in permanent damage to the Industrial PoE Switch.
CAUTION
DO NOT install the Industrial PoE Switch in areas where strong electromagnetic fields (EMF) exist. Failure to observe this caution could result in poor Industrial PoE Switch performance and data corruption.
CAUTION
The Industrial PoE Switch must be mounted to a
CAUTION
When connecting DC power wires to the
CAUTION
This is a Class A product. In a residential environment, this product could cause radio interference in which case the user may be required to take adequate corrective measures.
Continued on next page
v |