Compliance Information
CISPR22/EN55022 Class A & B
CE Mark
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class A&B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user's own expense.
Canadian Regulations
This digital apparatus does not exceed the Class A&B limits for radio noise for digital apparatus set out on the radio interference regulations of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la Class A&B prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.
|
|
| Declaration of Conformity |
|
|
| |
|
|
| |
Name of Mfg: | Transition Networks | ||
|
|
| 6475 City West Parkway, Minneapolis MN 55344 USA |
Model: | |||
Part Number(s): | |||
Regulation: | EMC Directive 89/336/EEC | ||
Purpose: To declare that the
CISPR 22: 1993; EN 55022:1998 Class A&B; EN 55024:1998
I, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s).
| _July 8, 2000_____ |
Stephen Anderson, | Date |
Trademark Notice
All trademarks and registered trademarks are the property of their respective owners.
Copyright Restrictions
© 2000,
All rights reserved. No part of this work may be reproduced or used in any form or means (graphic, electronic, mechanical) without written permission from Transition Networks.
Printed in the U.S.A. | 33193.C |
|
|