TN-GLC-xx-xx SFPs
Installing the fiber cables
1.Locate or build
2.Install the fiber cable as shown below.
Connect fiber cable | Connect fiber cable |
to media converter | to other device |
as shown. | (media converter, |
| hub, etc.) as shown |
RX | RX |
TX | TX |
Cable Specification
Copper cable (Category 5 -- minimum requirement)
•Gauge = 24 to 22 AWG; Attenuation = 22.0 dB /100m @ 100 MHz
•
•Shielded
•All pin pairs (1&2, 3&6, 4&5, 7&8) are active in a gigabit network.
•Use only dedicated wire pairs for the active pins; e.g., blue/white & white/blue,
orange/white & white/orange, etc.
•Do not use flat or silver satin wire.
|
| Crossover Cable |
|
| ||||||||
Twisted Pair #1 |
|
| 1 |
|
| 1 |
| Twisted Pair #1 | 1 |
| 1 |
|
|
| 2 |
|
| 2 |
| 2 |
| 2 |
| ||
|
|
|
|
|
|
|
|
| ||||
Twisted Pair #2 |
|
| 3 |
| 3 |
| Twisted Pair #2 | 3 |
| 3 |
| |
|
| 6 |
|
| 6 |
| 6 |
| 6 |
| ||
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
4 | Tech Support: | techsupport@transition.com | 5 |