Transition Networks SSEFE10XX-10X specifications Part Number, Port Two Fiber Optic, SSEFE1012-100

Page 1

User’s Guide

SSEFE10xx-10x

Stand-Alone Media Converter

Switchable Ethernet and Fast Ethernet

10 Mb/s Copper to Fiber

100 Mb/s Copper to Fiber

Transition Networks SSEFE10xx-10x series Ethernet / Fast Ethernet media converter is a 10Mbps or 100Mbps switch-selectable media

converter. Both the copper and fiber links operate at the same speed setting via a hard set with a dip switch, so the media converter operates at either 10 Mb/s copper to fiber or 100 Mb/s copper to fiber.

Part Number

Port One - Twisted-Pair

Port Two - Fiber Optic

 

Copper

 

 

 

 

SSEFE1012-100

RJ-45, 100 m (328 ft)*

ST, 1310 nm single mode

 

 

duplex fiber, 20 km (12.4 miles)*

 

 

 

SSEFE1014-100

RJ-45, 100 m (328 ft)*

SC, 1310 nm single mode

 

 

duplex fiber, 20 km (12.4 miles)*

 

 

 

SSEFE1015-100

RJ-45, 100 m (328 ft)*

SC, 1310 nm single mode

 

 

duplex fiber, 40 km (24.8 miles)*

 

 

 

SSEFE1022-100

RJ-45, 100 m (328 ft)*

ST, 1310 nm single mode

 

 

duplex fiber, 40 km (24.8 miles)*

 

 

 

SSEFE1029-100

RJ-45, 100 m (328 ft)*

SC, 1310 mn (TX)/1550 nm (RX)

 

 

single fiber, 20 km (12.4 miles)*

 

 

 

SSEFE1029-101

RJ-45, 100 m (328 ft)*

SC, 1550 mn (TX)/1310 nm (RX)

 

 

single fiber, 20 km (12.4 miles)*

*Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network. (TX) = transmit, (RX) = receive

The SSEFE10xx-10x media converter is designed to be installed in pairs, where one is the local media converter and the other is the remote. For example, a local SSEFE1011-100 converter is connected, via fiber, to a remote SSEFE1011-100 converter.

For a single fiber network, a local SSEFE1029-100is connected, via fiber, to a remote SSEFE1029-101converter.

Installation

.2

Operation

.5

Cable Specifications

.6

Technical Specifications

.8

Troubleshooting

.9

Compliance Information

12

Image 1
Contents Port Two Fiber Optic Part NumberSSEFE1012-100 SSEFE1014-100Set Link Pass-Through switch InstallationSet the Speed switch Power the Media ConverterInstall the Copper Cable Install the Fiber CableOperation Status LEDsCopper Cable Fiber Cable Cable SpecificationsTroubleshooting Technical SpecificationsContact Us European Regulations Compliance InformationTrademark Notice Copyright Restrictions