Transition Networks S4TEF10xx-11x Compliance, Vcci Class 1 compliance, Trademark notice

Page 15

S4TEF10xx-11x

Compliance -- continued

VCCI Class 1 compliance

This equipment is in the 1st Class category (information equipment to be used in commercial and/or industrial areas) and conforms to the standards set by the Voluntary Control Council For Interference by Data Processing

Equipment and Electronic Office Machines aimed at preventing radio interference in commercial and/or industrial areas. When used in a residential area or in an adjacent area thereto, interference may be caused to radio and TV receivers, etc. Read the instructions for correct handling.

Trademark notice

All trademarks and registered trademarks are the property of their respective owners.

Copyright restrictions

© 2005 Transition Networks.

All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - without written permission from Transition Networks.

28 Printed in the U.S.A.

33301.F

Image 15
Contents S4TEF10xx-11x Switch set #1 T1/E1 options InstallationInstallation Configuration switchesDown Disable the transmit AIS function RS-232 Port Mode This switch is inactive if switch 4 is upTransmit AIS Twisted-pair Auto-Negotiation Switch set #2 serial and ethernet optionsInstall the ethernet cable Install the fiber cablePower the media converter Install the T1/E1 cableOperation OperationAccessing the local RS232 factory maintenance interface Remote management functionRS-232 status speed, bits, parity, stop Command sequence is not case sensitive Number of the command, in this case 1= enable or 2 = disableNumber of the command, in this case 1= enable or 2 = disable Cable Specifications To Reset the local deviceFiber cable Cable Specifications Ethernet cableT1/E1 cable Technical Specifications Troubleshooting TroubleshootingCompliance Information Contact UsCopyright restrictions ComplianceVcci Class 1 compliance Trademark notice