Troubleshooting

SBFTF10xx-12x

If the media converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action:

1.Is the power LED on the media converter illuminated?

•Is the power adapter the proper type of voltage and cycle frequency for the AC outlet? (See “Power Supply” on page 13.)

•Is the power adapter properly installed in the media converter and in the outlet?

•Contact Technical Support: US/Canada: 1-800-260-1312,

International: 00-1-952-941-7600.

YES

•Proceed to step 2.

2.Is the “Duplex/Link” LED illuminated on a port with twisted-pair cable installed?

•Check the copper cables for proper connection.

•Contact Technical Support: US/Canada: 1-800-260-1312,

International: 00-1-952-941-7600.

YES

•Amber = The media converter has selected half-duplex mode.

•Green = The media converter has selected full-duplex mode.

•If the mode is not correct, disconnect and reconnect the twisted pair cable to restart the initialization process.

•Proceed to step 3.

3.Is the “LACT” LED illuminated on the fiber cable port?

•Check the fiber cables for proper connection.

•Verify that the TX and RX cables are connected to the RX and TX ports, respectively, on the 100Base-FX device.

•Contact Technical Support: US/Canada: 1-800-260-1312,

International: 00-1-952-941-7600.

YES

•Proceed to step 4.

4.Is the “Speed” LED illuminated on a port with twisted-pair cable installed?

•Check the copper cables for proper connection.

•Contact Technical Support: US/Canada: 1-800-260-1312,

International: 00-1-952-941-7600.

YES

•Amber = The media converter has selected 10Mb/s operation.

•Green = The media converter has selected 100Mb/s operation.

•If the speed is not correct, disconnect and reconnect the twisted pair cable to restart the initialization process.

•Contact Technical Support: US/Canada: 1-800-260-1312,

International: 00-1-952-941-7600.

Compliance Information

CISPR22/EN55022 Class A + EN55024

CE Mark

FCC Regulations

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user's own expense.

Canadian Regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

European Regulations

Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Achtung! Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes Rundfunkstörungen auftreten. In diesem Fäll ist der Benutzer für Gegenmaßnahmen verantwortlich.

Attention! Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer des interférences radioélectriques, il appartiendra alors à l'utilsateur de prende les measures spécifiques appropriées.

VCCI Class 1 Compliance

This equipment is in the 1st Class category (information equipment to be used in commercial and/or industrial areas) and conforms to the standards set by the Voluntary Control Council For Interference by Data Processing

Equipment and Electronic Office Machines aimed at preventing radio interference in commercial and/or industrial areas. When used in a residential area or in an adjacent area thereto, interference may be caused to radio and TV receivers, etc. Read the instructions for correct handling.

CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network.

Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG- Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer Konformität.

24-hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.

SBFTF1014-120, SBFTF1011-120, SBFTF1025-120, SBFTF1018-120, SBFTF1015-120 specifications

Transition Networks is a leading provider of network connectivity solutions, and their SBFTF series switches exemplify the company’s commitment to high performance and reliability. The SBFTF1016-120, SBFTF1025-120, SBFTF1013-120, SBFTF1015-120, and SBFTF1014-120 are part of this series, designed for a variety of applications in industrial environments.

These switches are equipped with advanced features that cater to the demanding requirements of modern communication networks. One of the key characteristics of the SBFTF series is their versatility in supporting both copper and fiber connections. This flexibility ensures smooth integration into existing infrastructures while enabling expanded networking capabilities.

The SBFTF1016-120 model stands out with its 16-port configuration, allowing for substantial connectivity options. It supports both Fast Ethernet and Gigabit Ethernet, making it suitable for various data transfer needs. The inclusion of PoE (Power over Ethernet) capabilities facilitates efficient power management, especially for devices like IP cameras and wireless access points.

In contrast, the SBFTF1025-120 model features a 25-port layout, perfect for environments requiring numerous connections. Its robust design ensures reliability in harsh conditions, making it ideal for industrial settings. Like the other models, it supports multiple media types, enhancing its versatility.

The SBFTF1013-120, SBFTF1015-120, and SBFTF1014-120 models are designed with specific user needs in mind. The SBFTF1013-120 offers 13 ports, focusing heavily on redundancy, which is critical in mission-critical applications. The SBFTF1015-120 features a balance between port density and performance, while the SBFTF1014-120 caters to businesses needing a slightly reduced port count without sacrificing functionality.

All SBFTF series switches are known for their rugged construction, making them suitable for deployment in environments with demanding conditions such as extreme temperatures and vibrations. Alongside their durability, these switches provide high-speed data transmission, low latency, and advanced network management capabilities.

Additionally, management features such as VLAN support, link aggregation, and advanced monitoring tools enhance network efficiency and performance. This makes them not only a reliable choice but also a flexible solution for growing networks in various sectors, including manufacturing, transportation, and smart city applications.

In summary, Transition Networks SBFTF series switches, including the SBFTF1016-120, SBFTF1025-120, SBFTF1013-120, SBFTF1015-120, and SBFTF1014-120, embody innovation, reliability, and functionality in network connectivity. Whether for robust industrial applications or integration into complex network environments, these switches provide an excellent balance of features that cater to diverse requirements.