4-3-2. Port / Trunk Configuration
This page can change every port status and configure trunk groups. Press TAB key to change the configuration of each item.
1.Enabled: User can disable or enable the port. Port 9 is always enabled.
2.Auto Negotiate: Ports 1 to 8 (100Mbps Fiber) are disabled, Port 9 (SFP port) is enabled.
3.Speed/Duplex Config: Ports 1 to 8 (100 Mbps Fiber port) can be set for
4.Flow Control: User can set flow control function to be on or off for ports 1 to 8. Flow control for Port 9 (SFP port) is fixed at enabled (on).
5.Group: User can set trunk groups for ports 1 to 8. There are four possible trunk groups. Port 9 is not available for trunk groups.
24