Transition Networks MIL-SM808GPXX manual Aggregator Setting, Actions

Page 66

4-4-4-1.Aggregator Setting

4-4-4-1.Aggregator Setting

1.Group: Displays the trunk group ID.

NOTE: Before setting LACP support, you must first set the trunk group using the Port / Trunk Configuration screen.

2.LACP: Press the Space key to enable or disable LACP (Link Aggregation Control Protocol) support. If enabled, the group is an LACP static trunking group. If disabled, the group is a local static trunking group.

3.LACP Work Port Num: The maximum number of ports that can be aggregated at the same time. If the group is an LACP static trunking group, the exceed ports is standby and able to aggregate if the work ports fail. If the group is a local static trunking group, the number must be the same as group ports.

Actions->

<Edit>: Configures all items. When finished, pressing ESC returns to the action menu line.

<Save>: Saves all configured values.

<Quit>: Exits this page and returns to previous menu.

60

Image 66

Contents 8 Port 100BASE-FX Plus One SFP Intelligent Fiber SwitchMIL-SM808GPxx USER GUIDERegulatory Approval FCC Class A UL CSA C22.2 No EN60950 CE To Contact MiLAN Technology Table of Contents 4-3-4-2. Create a VLAN Group 5-4-3. Console Port Information 5-4-4. Port Controls 5-4-5. Trunking 1. Introduction Features Intelligent Management FeaturesPackage Contents Management MethodsConsole and Telnet Management Web-based Management SNMP Network Management Hardware Description Front PanelLED Indicators Status ColorDescription Power Plug Power On/Off Switch Desktop InstallationRear Panel Attaching Rubber FeetPower On Network Application Segment ApplicationNetwork Configuration Connecting a Terminal or PC to the Console PortConsole - Menu Baud Rate 9600 bps Data Bits Parity none Stop Bits Flow Control Nonelogon screen and a new login is necessary in order to continue 4-1 Main Menu Control Key4-2. Status and Counters 4-2-1. Port Status Actions4-2-2. Port Counters Reset All Sets all counters toHardware Version Displays the switch’s Hardware version 4-2-3. System InformationFirmware Version Displays the switch’s firmware version Kernel version Displays Boot PROM version4-3. Switch Static Configuration 4-3-1. Administration ConfigurationPage 4-3-1-1. Device Information 4-3-1-2. IP Configuration 4-3-1-4. Change Password 4-3-1-3. Change UsernameUse this screen to change the Password. The default password is root 4-3-2. Port / Trunk Configuration Quit Exits the port configuration page and returns to previous menu 4-3-3. Port Mirroring Configuration action menu line Save Saves all configured values 4-3-4. VLAN Configuration Port Based VLANs 4-3-4-1. VLAN ConfigureChoose a VLAN IEEE802.1Q VLANsPage 4-3-4-2. Create a VLAN Group Page 4-3-4-3. Edit / Delete a VLAN Group 4-3-5. Priority Configuration Page 4-3-6.MAC Address Configuration 4-3-6-1.Static MAC Address Add static MAC address 3. In the Port num field, enter the port number for the device3. Press the Edit key to modify all the items Edit static MAC address1. Press Edit key to modify a static MAC address Delete static MAC address4-3-6-2.Filtering MAC Address 4-3-7.Misc Configuration 4-3-7-1.Port Security 4-3-7-2.MAC Age Interval 4-3-7-3.Broadcast Storm Filtering Page 4-3-7-4.Max Bridge Transmit Delay Bound Save Saves all configured values 4-4.Protocol Related Configuration 4-4-1.STP 4-4-1-1.STP Enable Page 4-4-1-2.System Configuration Page 4-4-1-3.STP Port Configuration 4-4-2.SNMP Page 4-4-2-1.System Options 1. System Name Enter a name to identify the switch3. System Location Enter the location of the switch 4-4-2-2.Community Strings Save Saves all configured values 4-4-2-3.Trap Managers 4-4-3.GVRP Press the Space key to choose Enabled or Disabled4-4-4.LACP 4-4-4-1.Aggregator Setting 4-4-4-2.State Activity 4-4-4-3.LACP Status 4-5.Reboot Switch 4-6.Updating Firmware using the Console Port Page Page Web-Based Management Web Management FunctionPage 5-1. Web Management Home Overview 1. Home Page5-2. Port status 5-4. Administrator 5-3. Port StatisticsPage 5-4-2. Switch Settings 5-4-2-1.Basic 5-4-1. IP AddressPage 5-4-2-2.Advanced 2. Priority Queue Service settings Page Enable Mode Enables the switch to be the IGMP Querier 3. Protocol Enable SettingEnable Internet Group Multicast Protocol Enables IGMP protocol No VLAN Default4. IGMP Theory of Operation Page GVRP GARP VLAN Registration Protocol 5-4-3. Console Port Information Baud rate bits/sec Data Bits Parity Check none Stop BitsFlow Control none 5-4-4. Port Controls 5-4-5. TrunkingPage 5-4-5-1. Aggregator Setting 5-4-5-2. Aggregator Information 5-4-5-3. State ActivityPage 5-4-6. Filter Database 5-4-6-1. IGMP Snooping 5-4-6-2. Static MAC Address 5-4-6-3. Port Security 5-4-6-4. MAC Filtering 5-4-7. VLAN Configuration 5-4-7-1. Basic Create a VLAN and add tagged member ports to it 5-4-7-2. Port VID Page 5-4-8. Spanning Tree Hello Time PriorityMax Age ForwardPage 5-4-9. Port Mirroring 5-4-10. SNMP 3. Trap Manager 5-4-11.Security Manager User Name root Password root5-4-12. TFTP Update Firmware 5-4-13. Configuration Backup 5-4-13-1. TFTP Restore Configuration5-4-13-2. TFTP Backup Configuration 5-4-14. Reset System 5-4-15. RebootReset Switch to default configuration Technical Specifications 440mmx 160mmx 44mm L x W x HSafety UL, cULTroubleshooting Incorrect connectionsDiagnostic LED Indicators Cabling 90000407Rev. A