Transition Networks MIL-SM808GPXX manual Create a VLAN Group, Actions

Page 37

4-3-4-2. Create a VLAN Group

4-3-4-2. Create a VLAN Group

To create a VLAN and add tagged /untagged member ports to it:

1.VLAN Name: Type a name for the new VLAN using 15 alphanumeric characters and no spaces.

2.VLAN ID: Type a VID (between 2~4094). The default is 1.

3.Protocol VLAN: Press the Space key to choose protocol type. When set, this acts as a packet filter on the port by restricting packets on the port of only the selected protocol type.

4.Member: Press the Space key to choose VLAN membership. There are three selections:

UnTagged: the member port is an untagged port.

Tagged: the member port is a tagged port.

No: The port is not a member of this VLAN group.

5.Save the configuration.

Actions->

<Quit>: Exits this page and returns to previous menu.

<Edit>: Configures all items. When finished, pressing ESC returns to the action menu line.

<Save>: Saves all configured values.

31

Image 37

Contents MIL-SM808GPxx Intelligent Fiber Switch8 Port 100BASE-FX Plus One SFP USER GUIDERegulatory Approval FCC Class A UL CSA C22.2 No EN60950 CE To Contact MiLAN Technology Table of Contents 4-3-4-2. Create a VLAN Group 5-4-3. Console Port Information 5-4-4. Port Controls 5-4-5. Trunking 1. Introduction Intelligent Management Features FeaturesManagement Methods Package ContentsConsole and Telnet Management Web-based Management SNMP Network Management Front Panel Hardware DescriptionStatus Color LED IndicatorsDescription Rear Panel Desktop InstallationPower Plug Power On/Off Switch Attaching Rubber FeetPower On Segment Application Network ApplicationConnecting a Terminal or PC to the Console Port Network ConfigurationBaud Rate 9600 bps Data Bits Parity none Stop Bits Flow Control None Console - Menulogon screen and a new login is necessary in order to continue Control Key 4-1 Main Menu4-2. Status and Counters Actions 4-2-1. Port StatusReset All Sets all counters to 4-2-2. Port CountersFirmware Version Displays the switch’s firmware version 4-2-3. System InformationHardware Version Displays the switch’s Hardware version Kernel version Displays Boot PROM version4-3-1. Administration Configuration 4-3. Switch Static ConfigurationPage 4-3-1-1. Device Information 4-3-1-2. IP Configuration 4-3-1-3. Change Username 4-3-1-4. Change PasswordUse this screen to change the Password. The default password is root 4-3-2. Port / Trunk Configuration Quit Exits the port configuration page and returns to previous menu 4-3-3. Port Mirroring Configuration action menu line Save Saves all configured values 4-3-4. VLAN Configuration Choose a VLAN 4-3-4-1. VLAN ConfigurePort Based VLANs IEEE802.1Q VLANsPage 4-3-4-2. Create a VLAN Group Page 4-3-4-3. Edit / Delete a VLAN Group 4-3-5. Priority Configuration Page 4-3-6.MAC Address Configuration 4-3-6-1.Static MAC Address 3. In the Port num field, enter the port number for the device Add static MAC address1. Press Edit key to modify a static MAC address Edit static MAC address3. Press the Edit key to modify all the items Delete static MAC address4-3-6-2.Filtering MAC Address 4-3-7.Misc Configuration 4-3-7-1.Port Security 4-3-7-2.MAC Age Interval 4-3-7-3.Broadcast Storm Filtering Page 4-3-7-4.Max Bridge Transmit Delay Bound Actions 4-4.Protocol Related Configuration 4-4-1.STP 4-4-1-1.STP Enable Page 4-4-1-2.System Configuration Page 4-4-1-3.STP Port Configuration 4-4-2.SNMP Page 1. System Name Enter a name to identify the switch 4-4-2-1.System Options3. System Location Enter the location of the switch 4-4-2-2.Community Strings Quit Exits this page and returns to previous menu 4-4-2-3.Trap Managers Press the Space key to choose Enabled or Disabled 4-4-3.GVRP4-4-4.LACP 4-4-4-1.Aggregator Setting 4-4-4-2.State Activity 4-4-4-3.LACP Status 4-5.Reboot Switch 4-6.Updating Firmware using the Console Port Page Page Web Management Function Web-Based ManagementPage 1. Home Page 5-1. Web Management Home Overview5-2. Port status 5-3. Port Statistics 5-4. AdministratorPage 5-4-1. IP Address 5-4-2. Switch Settings 5-4-2-1.BasicPage 5-4-2-2.Advanced 2. Priority Queue Service settings Page Enable Internet Group Multicast Protocol Enables IGMP protocol 3. Protocol Enable SettingEnable Mode Enables the switch to be the IGMP Querier No VLAN Default4. IGMP Theory of Operation Page GVRP GARP VLAN Registration Protocol Baud rate bits/sec Data Bits Parity Check none Stop Bits 5-4-3. Console Port InformationFlow Control none 5-4-5. Trunking 5-4-4. Port ControlsPage 5-4-5-1. Aggregator Setting 5-4-5-3. State Activity 5-4-5-2. Aggregator InformationPage 5-4-6. Filter Database 5-4-6-1. IGMP Snooping 5-4-6-2. Static MAC Address 5-4-6-3. Port Security 5-4-6-4. MAC Filtering 5-4-7. VLAN Configuration 5-4-7-1. Basic Create a VLAN and add tagged member ports to it 5-4-7-2. Port VID Page 5-4-8. Spanning Tree Max Age PriorityHello Time ForwardPage 5-4-9. Port Mirroring 5-4-10. SNMP 3. Trap Manager User Name root Password root 5-4-11.Security Manager5-4-13. Configuration Backup 5-4-13-1. TFTP Restore Configuration 5-4-12. TFTP Update Firmware5-4-13-2. TFTP Backup Configuration 5-4-15. Reboot 5-4-14. Reset SystemReset Switch to default configuration 440mmx 160mmx 44mm L x W x H Technical SpecificationsUL, cUL SafetyIncorrect connections TroubleshootingDiagnostic LED Indicators 90000407Rev. A Cabling