IBM BDM-610000049 user manual External Power Management CN12, Optional RTC Battery Input CN13

Page 63

External Power Management (CN12)

An external power management connector (CN12) is available for external devices to wake the system from low power states. Some low power modes require that +5 V standby power is applied to the cpuModule during the wake event.

For more information on power management, including a description of the board’s supported wake options, refer to the Power Management section on page 73.

Table 35 External Power Management (CN12)

Pin

Signal

Function

 

 

 

1

+5V_STDBY

+5 V standby Power

 

 

 

2

GND

Ground

 

 

 

2

PME#

Power Management Event input

 

 

 

Optional RTC Battery Input (CN13)

The optional RTC battery input is the connection for an external backup battery. This battery is used by the cpuModule when system power is removed in order to preserve the date and time in the real time clock.

Connecting a battery is only required to maintain time when power is completely removed from the cpuModule. A battery is not required for board operation.

Table 36 Optional RTC Battery Input (CN13)

Pin

Signal

Function

 

 

 

1

BAT

RTC Battery Input

 

 

 

2

GND

Ground

 

 

 

WARNING This optional RTC battery connector (CN13) should be left unconnected if the utility port connector (CN5) has a battery connected.

Fan Power, +5 V (CN14)

If a fan is required to cool the cpuModule, it can be wired to CN14, which provides a continuous connection to +5 V and ground.

Table 37 Fan Power, +5 V (CN14)

Pin

Signal

Function

 

 

 

1

+5V

+5 Volts DC

 

 

 

2

GND

Ground

 

 

 

Note To utilize the thermal fan mode feature in the BIOS, the fan must be connected to CN15

BDM-610000049 Rev G

Chapter 3: Connecting the cpuModule 53

Image 63
Contents BDM-610000049 Revision G CMX158886 cpuModulesRevision Date Reason for Change 12/13/06 Initial release Revision HistoryCMX158886 cpuModules Iv CMX158886 cpuModule Table of Contents Audio CN11 MultiPort CN6Port 1 Data register is a read/write byte direction MultiPort Advanced Digital I/O Ports aDIOSystem Recovery User EepromApplication Notes 107 CMX158886 cpuModule Chapter CMX158886 cpuModule top view CMX158886 cpuModulesADIO with Wake-on-aDIO Error-Correction Codes Selected Models OnlyEnhanced Intel SpeedStep PX only Thermal MonitorCMX158886 cpuModule Part Number Description Ordering InformationCMX158886 Model Options CMX158886 cpuModule Model OptionsCable Kits and Accessories Board Features VGA, SVGA, XGA, SXGA, Uxga Bios 10 CMX158886 cpuModule CMX158886 cpuModule Simplified Block Diagram Block DiagramElectrical Characteristics SpecificationsPhysical Characteristics Power ConsumptionVos Electrical CharacteristicsSymbol Parameter Test Condition Min Max IocInput Voltage High Common ModeOutput Voltage High Output Voltage LowContact Information 16 CMX158886 cpuModule Getting Started CMX158886 Connector Locations Connector LocationsCMX158886 Basic Connectors Connecting the Utility Cable Connecting a KeyboardConnecting to the PC/104-PlusPCI Bus Slot Selection Switches PCI Bus Expansion Card PowerPCI Bus Signaling Levels Booting the CMX158886 cpuModule for the First Time Connecting the cpuModule Proper Grounding Techniques PC/104-PlusPCI Bus 120-pin Auxiliary Power CN3 Auxiliary Power Connector CN31Pin Signal Function GND Speaker Utility Port Connector CN5Utility Port Connector CN5 Pin Signal Function In/OutMouse System ResetSoft Power Button KeyboardBattery Svga Video Connector CN18 Svga Video Connector CN18Resolution Colors Refresh Rates Svga Video ResolutionsTested Lvds Panels Lvds Flat Panel Video Connector CN19Flat Panel Video Connector CN19 Manufacturer Model Number Resolution Color DepthEide Connector CN10 Eide Connector CN101Pin Signal Installing and Configuring the ATA/IDE Disk Chip ATA/IDE Disk Chip Socket U16ATA/IDE Disk Chip Socket U161 CMX158886 before and after ATA/IDE Disk Chip Installation Serial Port 1 CN7 and Serial Port 2 CN8 RS-232 Serial Port DefaultSerial Port Settings Serial Port in RS-232 ModePort Half-Duplex RS-485 ModeRS-422 or RS-485 Serial Port Full-Duplex ConnectionsReceive Data + Reseved Serial Port in RS-422/485 ModePin Signal Function In/Out DB-9 Transmit Data +COM a RS-232 and COM BRS-232 Dual Serial Port ModesDual Serial Port Connections Dual Serial Port ModesCOM a RS-422/485 and COM B RS-422/485 COM a RS-422/485 and COM B RS-232CN6 Pin Function MultiPort Configured as an Advanced Digital I/O aDIO PortMultiPort CN6 MultiPort aDIO PinoutMultiPort Configured as a Parallel Port MultiPort Connector CN6 as a Parallel PortCN6 Pin Signal Function In/Out DB-25 CN6 Pin Function DB-25 Floppy Drive Pin MultiPort Configured as a Floppy Drive ControllerMultiPort Connector Floppy Pinout CN61 Odd pinsUSB Connector CN17 USB 2.0 Connector CN1746 CMX158886 cpuModule Ethernet 10/100Base-T and -TX Connector CN20 Ethernet Connector CN20RJ-45 Pin Pin DIL Pin Signal Function In/Out Audio Connector CN11 Pin DIL Pin Signal Function In/OutAudio CN11 PC/104-PlusBus Signal Assignments1 PC/104-PlusPCI Bus CN16Pin Address and Data PC/104-PlusPCI Bus SignalsPower Supplies and VIO Serial Interrupt Request Bridge Link CN4Bridge Link CN4 Legacy/ISA DMA RequestExternal Power Management CN12 Optional RTC Battery Input CN13Fan Power, +5 V CN14 Fan Power, Switched CN15 Fan Power, Switched CN15+5 Volts DC, switched Using the cpuModule Setup Keys RTD Enhanced AMI BiosConfiguring the RTD Enhanced AMI Bios Entering the Bios SetupField Active Keys Selections Main Menu Setup FieldsPower On Self Test Post Codes Main Menu Setup FieldsBooting to Boot Block Flash with Fail Safe Boot ROM Memory Map First Megabyte Memory MapAddress hex Description Address Map O Addresses Reserved for the CMX158886 cpuModuleAddress Range hex Bytes Device Hardware Interrupts Hardware Interrupts Used on the CMX158886 cpuModuleInterrupt Normal Use Port 1 Data I/O Address 451h MultiPort Advanced Digital I/O Ports aDIODigital I/O Register Set Port 0 Data I/O Address 450hDIO-Control I/O Address 453h-Read Access DIO-Control I/O Address 453h-Write AccessMulti-Function at Address 452h1 Reserved =Interrupt is enabledInterrupts Wake Control I/O Address 451hNo Interrupt or Wake event is generated WakeEnable Int Mask FunctionWake-on-aDIO Interrupt and Wake Event GenerationEthernet 10/100Base-T and -TX MultiPort Parallel Port ControlMultiPort Floppy Drive AC’97 AudioIDE Controller Configuration Cable ModesCable Detection Configuring the ATA/IDE Disk Chip Socket Legacy Mode and Native Mode IDEReal Time Clock Registers Accessing the RTC RegistersReal Time Clock Control Overview0Dh Registers Registers Function Hex decimal0Bh 0ChWatchdog Timer Control I/O Address 455h Watchdog Timer ControlFan Mode Further Temperature ReductionThermal Management Low-Power Wake Options Power ManagementAdvanced Configuration and Power Interface Acpi Power Button ModesATX Power Supply Signals AT vs. ATX Power SuppliesReducing Power Consumption Manual LED Colors Multi-Color LEDLED Colors Multi-Color LED I/O Address 456hReset Status Register Reset Status I/O Address 457h Read AccessReset Status I/O Address 457h Write Access Address Reset Description Reset Status Description and PrioritiesDvmt Mode Select Eeprom Register Description Bit Signal Function Read / WriteUser Eeprom User Eeprom I/O Address 456hFeatures and Settings That Can Affect Boot Time System Recovery Loading Default Bios SettingsBooting to the Fail Safe Boot ROM Fsbr Interrupt Request Lines What happens when an interrupt occurs?Basic Interrupt Information for Programmers How long does it take to respond to an interrupt?Sample Code Writing an Interrupt Service Routine ISRIntel 8259 Programmable Interrupt Controller PCI InterruptsAppendix a Hardware Reference JP9 JP2 Jumper Settings and LocationsJP13 Jumper Pins Function DefaultJP11 JP12Onboard PCI Devices Onboard PCI DevicesDevice ID Vendor ID Description CMX158886 Physical Dimensions ±0.005 inches Physical Dimensions90 CMX158886 cpuModule Appendix B Troubleshooting Common Problems and Solutions TroubleshootingProblem Cause Solution Troubleshooting cont’d Troubleshooting a PC/104-PlusSystemHow to Obtain Technical Support Appendix C Idan Dimensions and Pinout IDAN-CMX158886 Connectors1 Idan Dimensions and ConnectorsExternal I/O Connections PS/2 Mouse 6-Pin mini-DIN Connector femaleKeyboard 6-Pin mini-DIN Connector female Idan Pin # Signal FunctionCOM1/COM2 RS-232 9-Pin D Connector male COM1/COM2 RS-422/485 9-Pin D Connector maleIdan Pin # Signal Function Mode Idan Pin # ADIO Port Parallel Port Floppy Port CPU Pin # MultiPort 25-Pin D Connector femaleIdan Pin # Signal Name CPU Pin # Panel 20-Pin mini D Connector femaleGround Reserved DDC Data Monitor data Svga 15-Pin High Density D Connector femaleIdan Pin # Signal Function CPU Pin # Ground + 5 VoltsReceive + Reserved Transmit + Ground USB 9-Pin D Connector maleEthernet 9-Pin D Connector female Idan Pin # 10Base-T Signal CPU Pin #Idan Pin # Signal CPU Pin # Audio 9-Pin D Connector femaleIDAN-CMX158886-BRG Connectors1 Idan Dimensions and Connectors BRG version onlyADIO 37-Pin D Connector female External I/O Connections BRG version onlyBRG Pin # Function Idan Pin # 106 CMX158886 cpuModule Interrupt Programming PC/104 and PC/104-PlusSpecificationsApplication Notes Drivers and Example Programs108 CMX158886 cpuModule Appendix E Limited Warranty 110 CMX158886 cpuModule

BDM-610000049 specifications

The IBM BDM-610000049 is a powerful and versatile device designed for advanced data processing and analytics. This model is engineered to handle large volumes of data while ensuring high-speed performance and reliability. One of the main features of the BDM-610000049 is its robust processing capabilities, enabled by a state-of-the-art multi-core CPU architecture. This allows it to perform complex calculations and data manipulations efficiently, making it ideal for big data applications.

In terms of storage, the BDM-610000049 comes equipped with high-capacity SSD drives, which not only accelerate data access speeds but also enhance the overall system responsiveness. This feature is particularly beneficial for organizations that require rapid retrieval of stored information. The device also supports a variety of storage configurations, allowing users to tailor the system according to their specific needs, balancing between performance and capacity.

Networking technologies integrated into the BDM-610000049 are designed to facilitate seamless connectivity, ensuring quick and secure data transfers. Its advanced networking capabilities include support for multiple protocols, which streamline communication between different parts of the system and external devices. This is crucial for environments that rely on real-time data processing, such as financial services, healthcare, and logistics.

The IBM BDM-610000049 is also notable for its security features, which help protect sensitive data from unauthorized access and cyber threats. It incorporates state-of-the-art encryption protocols and secure access controls, providing an additional layer of safety for businesses handling critical information.

Moreover, the scalability of the BDM-610000049 is a key characteristic that sets it apart from competitors. Organizations can easily upgrade or expand their systems to accommodate growing data requirements without significant downtime or disruption. This flexibility is indispensable for businesses in today’s fast-paced digital landscape.

In summary, the IBM BDM-610000049 is a cutting-edge device that combines powerful processing, advanced storage technologies, robust networking capabilities, and enhanced security features. Its scalability ensures that it can grow with the demands of modern enterprises, making it a worthwhile investment for companies looking to harness the full power of their data. With the BDM-610000049, businesses can confidently pursue data-driven strategies, knowing they have a reliable and sophisticated technology solution at their disposal.