4.When the charged battery pack is needed, remove the battery pack from the charger.

When the battery charger is not in use, disconnect the DC power source.

Operational Considerations

Issues to consider when you use the FMW51BC1 battery charger are discussed as follows:

•You can insert up to two battery packs at a time in the battery charger. When charging two battery packs, you can insert or remove either battery pack independently.

•The battery charger only charges one battery pack at a time. When two battery packs are inserted in the charger, the battery pack installed first is charged first.

•The battery charger will indicate a full charge level and will not begin charging the battery pack if the battery pack charge level is 90% or higher when the battery pack is initially inserted in the charger. This prevents the battery pack from being overcharged.

•When you remove the battery pack from your pen tablet, always insert a charged battery pack in the pen tablet to replace the one that you removed, or apply DC power.

•The FMW51BP1, FMW29BP1, and FMW29BP2 battery packs use lithium ion battery cells which have no “memory effect.” You do not need to discharge or “condition” the battery pack before charging.

Battery Pack Charge Time

The approximate maximum amount of time needed to charge a fully discharged battery pack to the 90% level is shown in the following table. Note that when two battery packs are installed in the charger, they are charged sequentially (starting with the battery pack that is installed first).

 

Battery Pack

Approximate

 

Charge Time

 

 

 

 

 

 

 

3-cell

 

FMW51BP1

<2 hours

 

 

 

 

 

 

FMW29BP2

<2 hours

 

 

 

 

6-cell

 

FMW29BP1

<3.5 hours

 

 

 

 

2 of 2

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/ TV technician for help.

Changes or modifications not expressly approved by Fujitsu Personal Systems, Inc., could void the user’s authority to operate the equipment.

58-0664-00A

Page 1 Page 2
Page 2
Image 2
Fujitsu FMW51BC1 Operational Considerations, Battery Pack Charge Time, Battery Pack Approximate Charge Time, FCC Notice
Page 1 Page 2

FMW51BC1 specifications

The Fujitsu FMW51BC1 is a remarkable device that showcases cutting-edge technology and innovative features aimed at enhancing user experience and operational efficiency. Designed primarily as a network communication device, the FMW51BC1 integrates various advanced functionalities that cater to the ever-evolving demands of modern connectivity.

One of the standout features of the Fujitsu FMW51BC1 is its high-speed data processing capabilities. Equipped with a powerful processor, it ensures smooth and efficient performance, allowing users to handle multiple tasks seamlessly. This makes it an ideal choice for both personal and professional environments, where efficiency is paramount.

The device supports a wide range of wireless communication protocols, including Wi-Fi 6 and 5G connectivity, enabling users to enjoy ultra-fast internet speeds and superior data transfer rates. This is particularly beneficial for users who rely on cloud-based applications or are engaged in activities such as streaming, gaming, or large file transfers.

Security is another key characteristic of the FMW51BC1. With advanced encryption technologies and integrated security features, users can rest assured that their data is protected against unauthorized access and cyber threats. This focus on security makes it a suitable choice for businesses that handle sensitive information.

Additionally, the Fujitsu FMW51BC1 boasts an ergonomic design that enhances portability. Its sleek and lightweight build allows for easy transportation, making it an excellent option for professionals on the go. Users can easily set it up in different locations without hassle.

Integration with cloud services is seamless, allowing users to access and manage their data from anywhere, at any time. This feature promotes collaboration and productivity, as teams can work together efficiently, regardless of physical location.

Overall, the Fujitsu FMW51BC1 combines high performance, security, and portability, making it a versatile solution for connectivity in today's fast-paced digital world. Its commitment to advanced technology and user-friendly design positions it as a leading choice for individuals and organizations seeking reliable network communication solutions.
Top Page Image Contents