Fujitsu Siemens Computers B6210 manual Battery Charging Indicator, PC Card Access Indicators

(Figure 2-11)

B Series.book Page 14 Friday, May 19, 2006 3:00 PM

L i f e B o o k B 6 2 0 0 S e r i e s – S e c t i o n T w o

A shorted battery is damaged and must be replaced.

If there is no battery activity, the power adapters are not connected, and the power is Off, the Battery Level indicators will also be off.

BATTERY CHARGING INDICATOR

Located to the left of the Battery Level indicator is a small arrow symbol. This symbol states whether the battery is charging. This indicator will flash if the battery is too hot or cold to charge.

Batteries subjected to shocks, vibration or extreme temperatures can be permanently damaged.

WIRELESS LAN/BLUETOOTH

DEVICE ACCESS INDICATOR

The Wireless LAN/Bluetooth Access indicator shows whether the WLAN/Bluetooth switch is turned on and the WLAN module is in active mode.

HARD DRIVE OR REMOVABLE MEDIA DRIVE ACCESS INDICATOR

The Hard Drive Access indicator states whether your internal hard drive is being accessed.

1

PC CARD ACCESS INDICATORS

The PC Card Access indicator states whether or not your notebook is accessing a PC Card. The indicator will flash

14

if your software tries to access a PC Card even if there is no card inserted. See “PC Cards” on page 43.

2

COMPACT FLASH (CF) CARD ACCESS INDICATORS

The Compact Flash Card Access indicator states whether or not your notebook is accessing a Compact Flash Card. The indicator will flash if your software tries to access a Compact Flash Card even if there is no card inserted. See “Compact Flash Cards” on page 44.

NUMLK INDICATOR

The NumLk indicator states that the integral keyboard is set in ten-key numeric keypad mode.

CAPSLOCK INDICATOR

The CapsLock indicator states that your keyboard is set to type in all capital letters.

SCRLK INDICATOR

The ScrLk indicator states that your scroll lock is active.

SECURITY INDICATOR

The Security Indicator flashes (if a password was set) when the system resumes from Off or Standby modes. You must enter the password that was set in the Security Panel before your system will resume operation.