Fujitsu Siemens Computers B6210 manual Modem Result Codes

Models: B6210

1 128
Download 128 pages 59.73 Kb
Page 71
Image 71

B Series.book Page 63 Friday, May 19, 2006 3:00 PM

*Parity Check 1 nnnn

Parity error found in the system bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays "????". This is a potentially data destroying failure. Contact your support representative.

*Parity Check 2 nnnn

Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays "????". This is a potentially data destroying failure. Contact your support representative.

*Press <F1> to resume, <F2> to SETUP

Displayed after any recoverable error message. Press the [F1] key to continue the boot process or the [F2] key to enter Setup and change any settings.

*Previous boot incomplete – Default configuration used

Previous Power On Self Test did not complete success- fully. The Power On Self Test will load default values and offer to run Setup. If the previous failure was caused by incorrect values and they are not corrected, the next boot will likely fail also. If using the default settings does not allow you to complete a successful boot sequence, you should turn off the power and contact your support representative.

*Real time clock error

Real-time clock fails BIOS test. May require board repair. Contact your support representative.

*Shadow RAM Failed at offset: nnnn

Shadow RAM failed at offset nnnn of the 64k block at which the error was detected. You are risking data corruption if you continue. Contact your support repre- sentative.

nnnn Shadow RAM Passed

Where nnnn is the amount of shadow RAM in kilobytes successfully tested.

*System battery is dead – Replace and run SETUP

The BIOS CMOS RAM memory hold up battery is dead. This is part of your BIOS and is a board mounted battery which requires a support representative to change. You can continue operating but you will have to use setup utility default values or reconfigure your setup utility every time you turn off your notebook. This battery has an expected life of 2 to 3 years.

System BIOS shadowed

System BIOS copied to shadow RAM.

*System CMOS checksum bad – run SETUP

BIOS CMOS RAM has been corrupted or modified incorrectly, perhaps by an application program that

T r o u b l e s h o o t i n g

changes data stored in BIOS memory. Run Setup and reconfigure the system.

*System RAM Failed at offset: nnnn

System memory failed at offset nnnn of in the 64k block at which the error was detected. This means that there is a fault in your built-in memory. If you continue to operate, you risk corrupting your data. Contact your support representative for repairs.

nnnn System RAM Passed

Where nnnn is the amount of system memory in kilobytes successfully tested.

*System timer error

The timer test failed. The main clock that operates the computer is faulty. Requires repair of system board. Contact your support representative for repairs.

UMB upper limit segment address: nnnn

Displays the address of the upper limit of Upper Memory Blocks, indicating released segments of the BIOS memory which may be reclaimed by a virtual memory manager.

Video BIOS shadowed

Video BIOS successfully copied to shadow RAM.

MODEM RESULT CODES

The operating system and application software that is factory installed detects the modem characteristics and provides the necessary command strings to operate the modem. The internal modem operation is controlled by generic AT commands from the operating system and application software. The standard long form result codes may, in some cases, be displayed on your screen to keep you informed of the actions of your modem. The operating system and application software may suppress display of the result codes.

Examples of result codes are:

OK

NO CARRIER

NO DIALTONE

CONNECT 53000 (Connection complete at 53,000 bps.)

ERROR

FAX

RING (This means an incoming call.)

BUSY

NO ANSWER

When using the internal modem with applications that are not factory installed refer to the application documentation.

63

Page 71
Image 71
Fujitsu Siemens Computers B6210 manual Modem Result Codes

B6210 specifications

Fujitsu Siemens Computers B6210 is a remarkable mobile computing device that was geared towards business professionals who seek a balance of performance, portability, and reliability. This laptop, which emerged in the mid-2000s, is often remembered for its robust design and efficient functionality, making it an appealing option for those who needed a dependable machine for work on the go.

One of the key features of the B6210 is its compact design. Weighing in at just around 1.5 kilograms, this laptop is lightweight and easily portable, allowing users to carry it effortlessly between meetings, presentations, or any business engagements. Its sleek chassis not only enhances its aesthetic appeal but also emphasizes durability, ensuring it can withstand the rigors of daily use.

The B6210 is powered by Intel's processors of the time, which provided a solid performance for multitasking and running various applications. The device typically features the Intel Core Duo or Core 2 Duo processors, enabling users to handle demanding tasks with relative ease. Complementing the processing power is a memory capacity that can accommodate up to 4 GB of RAM, ensuring smooth performance even when running several applications simultaneously.

In terms of connectivity, the Fujitsu Siemens Computers B6210 is equipped with a variety of ports, including USB 2.0 ports, a VGA port, and a card reader, which facilitate easy connections to other devices and peripherals. Additionally, built-in Wi-Fi capabilities allow for seamless internet access, keeping professionals connected wherever they are.

The laptop boasts a 12.1-inch display, which strikes a good balance between visibility and portability. The screen supports resolutions up to 1280x800 pixels, providing crisp visuals for presentations and documents, while the anti-glare coating minimizes reflections, contributing to a comfortable viewing experience in various lighting conditions.

Security features are also a notable characteristic of the B6210. It often includes a fingerprint scanner, ensuring that sensitive data remains protected. Moreover, the laptop can come with a Trusted Platform Module (TPM) for enhanced data encryption and security.

Overall, the Fujitsu Siemens Computers B6210 embodies the essence of a reliable business laptop, providing essential features and technologies tailored for professionals. Its combination of portability, performance, and security makes it a noteworthy contender in the realm of mobile computing.