Fujitsu Siemens Computers B6210 manual External Video Port

B Series.book Page 51 Friday, May 19, 2006 3:00 PM

EXTERNAL VIDEO PORT

The external video port allows you to connect an external monitor or LCD projector. In order to connect an external device, follow these easy steps: See “LifeBook notebook rear panel” on page 12.

1.Remove the cover from the port opening, if present.

2.Align the connector with the port opening.

3.Push the connector into the port until it is seated.

4.Tighten the two hold-down screws, located on each end of the connector.

When a Port Replicator is attached and an external video device is plugged in, pressing the [Fn] + [F10] keys allows you to change your selection of where to send your display video. Each time you press the key combination, you will step to the next choice, starting with the built-in display panel only, moving to the external monitor only, finally moving to both the built-in display panel and an external monitor.

U s e r I n s t a l l a b l e F e a t u r e s

51