Magnifying a Specific Portion of an Image
ButtonsOperation
Projector |
2 |
1 |
3 |
s
4
Remote Control
3
1.2.34.5.6
This function allows you to magnify a specific portion of an image. This is useful when you want to display a detailed portion of the image.
(Slide the MOUSE/ADJUSTMENT switch | MOUSE ADJ. |
on the remote control to the ADJ. position) |
|
1 Press ENLARGE. Each time ENLARGE is pressed, the image will be magnified.
2When the image is magnified, you can pan and scan around the image by using ∂/ƒ/ß/©.
•ENLARGE does not work with UXGA signal image.
•Each time ENLARGE is pressed, image magnification toggles as shown below.
1 4 9 16 36 64
•If the input signal is changed during digital image magnification, the image will return to 1. The input signal is changed
(a)when INPUT 1.2.3 or INPUT 4.5.6 is pressed,
(b)when the input signal is interrupted, or
(c)when the input resolution and refresh rate changes.
3To return to 1, press UNDO.