Adjusting the Picture
Projector | Remote Control | Selecting the Signal Type |
Operation
1, 5
2, 3
4
1.2.3 4.5.6
(GUI)
Projector | Remote Control |
This function allows you to select the input signal type RGB (VIDEO) or COMPONENT for INPUT 1, 2, 4 or 5 port.
(Slide the MOUSE/ADJUSTMENT switch | MOUSE ADJ. |
on the remote control to the ADJ. position.) |
|
1Press MENU. Menu bar and “Picture” menu screen appear. GUI operation guide is also displayed.
2Press ∂/ƒ to select “Signal Type”, and then press ©.
3Press ∂/ƒ to select “RGB (VIDEO)” or “Component”.
4Press ENTER to save the setting.
5To exit from the GUI, press MENU.
Progressive Mode
Basic
1, 5
2, 3
4
1.2.3 4.5.6
(GUI)
This function allows you to select the progressive display of a video signal. The progressive display projects a smoother video image.
(Slide the MOUSE/ADJUSTMENT switch | MOUSE ADJ. |
on the remote control to the ADJ. position.) |
|
1Press MENU. Menu bar and “Picture” menu screen appear. GUI operation guide is also displayed.
2Press ∂/ƒ to select “Progressive Mode”, and then press ©.
3Press ∂/ƒ to select “2D Progressive”, “3D Progressive” or “Film Mode”.
4Press ENTER to save the setting.
5To exit from the GUI, press MENU.
Progressive Mode
Selects the progressive conversion mode.
2D Progressive
This function is useful to display
3D Progressive
This function is useful to display relatively
Mode that optimizes the image by estimating the movement of a number of preceding and succeeding frames.
Film Mode
Reproduces the image of film software clearly. Displays the optimized image of film transformed with
•Film Mode cannot work with PAL 50 Hz.