Displaying Dual Pictures (RGB menu only)
Projector | Remote Control |
1, 6
Picture in Picture function allows you to display two pictures on the same screen. You can display the image input from INPUT 4 or 5 as an inset picture overlapping the main picture input from INPUT 1, 2 or 3.
2, 3
4, 5
1.2.3 4.5.6
(Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “Pict in Pict”.
MOUSE ADJ.
OperationBasic
(GUI)
2
4
300 |
|
|
|
250 |
|
|
|
200 |
|
| A |
150 |
|
| B |
100 |
|
| C |
50 |
|
|
|
0 | 1997 | 1998 | 1999 |
1996 |
4Press ß/© to select “” to display an inset picture (Factory preset to INPUT 4).
•The image from INPUT 1, 2 or 3 is displayed as the main picture and the image from INPUT 4 or 5 is displayed as the inset picture.
•The last displayed image from INPUT 4 or 5 is displayed as the inset picture.
For example, when you want to display the image from INPUT 5 as the inset picture, select INPUT 5, then select the main picture, and then select “Pict in Pict”.
5Press ß/©/∂/ƒ to move the inset picture to one of four preset positions.
6To exit from the GUI, press MENU.
•Inset picture can only be displayed in composite signal of NTSC/PAL/SECAM.
•When selecting the image for the inset picture, only the images being input will be displayed.
•The audio of the insert picture will come out of the projector’s speakers.
•Picture in Picture does not work in case of the following RGB signals.
UXGA signal image Interlaced signal
DTV (480P/720P/1080i)
•You can only use the following functions while in Picture in Picture mode.
FREEZE: Works for the inset picture only.
TOOLS: Works with Picture in Picture, but the cursor is used for TOOLS. The inset picture cannot be moved.