Sharp XG-V10XU operation manual Watching DVD and Digital TV Images, For Better Sound, Amplifier

Watching DVD and Digital TV Images

Connecting to a DVD player, DTV decoder and other component video equipment using the 5 BNC Input

1 Connect each BNC connector of a component cable to the corresponding BNC INPUT 2 terminals on the projector.

• BNC-RCA adaptors are needed for use with RCA type cables and sources.

2 Connect the other end of the cable to the corresponding terminals on a DVD player or DTV decoder.

3 To use the built-in audio system, connect one end of an audio cable (sold separately) to the AUDIO INPUT 2 terminal on the projector.

4Connect the other end to the audio output terminal on the DVD player or DTV decorder.

When connecting this projector to a DVD player or DTV decoder, select “Component” for “Signal Type” on the GUI menu. (See page 45.)

Audio cable (sold separately)

Setup & Connections

3

4 To audio output terminals

2 To analog component	DTV decoder
output terminals	or
	DVD player

Component cable (sold separately)

1

CAUTION

	• Always turn off the projector before connecting to video
Three BNC-RCA adaptors	equipment, in order to protect both the projector and the
(Sold separately)	equipment being connected.

For Better Sound

Connecting to an amplifier and other audio components

CAUTION

• Always turn off the projector before connecting to audio components, in order to protect both the projector and the components being connected.

• By using external audio components, the volume can be amplified for better sound.

• The AUDIO OUTPUT terminals allow you to output audio to audio components from the selected AUDIO INPUT 1 to 5 terminals connected to audiovisual equipment.

To audio input terminals

Audio cable (sold separately)

Amplifier

e.g. Outputs for Inputs 4, 5

E-18