Installing and Configuring the Module
2.2.3Connecting the Cable
Twisted Pair | If you are using twisted pair cable, Modicon recommends Category 5, which is |
| rated to 100 Mbps. Use |
| snap into place. |
Fiber Optic | Use 62.5/125 fiber optic cable with |
| with connectors (990 XCA 656 09). |
Remove the protective plastic coverings from the cable ports and the tips of the cable. Snap one of the fiber cable clasps onto the cable, carefully pressing the cable through the slot so that the wider end of the clasp is closest to the boot.
|
|
| Cable Boot | Fiber | Cable Clasp | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 11 Attaching the Fiber Cable Clasp to the Cable
The key to installing the cable is to align the barrel, the locking ring and the connector.
Key | Barrel |
Arrow | Groove |
Lock | Locking Ring |
Figure 12 Aligning the Key and Locking Ring
18 | 840 USE 115 00 Version 1.0 |
