Cisco Systems 3030 manual Connecting through the Switch Module Console Port

Cisco Catalyst Blade Switch 3030 Getting Started Guide

Installing the Switch Module in the Server Chassis

Figure 4 Connecting through the Switch Module Console Port

C

CON

11x

11x

16x 15x 14x 13x

16x 15x 14x 13x 12x

Step 2 Start the terminal emulation session so you will be able to see the output display from the power-on self-test (POST). The terminal-emulation software—a PC application such as Hyperterminal or ProcommPlus—makes communication between the switch and your PC or terminal possible.

Configure the baud rate and character format of the PC or terminal to match these console port default characteristics:

•9600 baud

•8 data bits

•1 stop bit

•No parity

•None (flow control)

Step 3 Go to “Waiting for POST to Complete” section on page 1-13to finish configuring the switch module.

	Cisco Catalyst Blade Switch 3030 Getting Started Guide
1-10	78-17052-01