Cisco Systems 3030 manual Connecting to 10/100/1000 Ports

Cisco Catalyst Blade Switch 3030 Getting Started Guide

Installation Warning Statements

Figure 7 Connecting to 10/100/1000 Ports

12x 11x

11x

CON

16x 15x 14x 13x

16x 15x

143475

Use either a crossover or a straight-through cable for connections to a copper 10/100/1000 or 1000BASE-T SFP module port on the switch, regardless of the type of device on the other end of the connection.

Step 2 Insert the other cable end into an RJ-45 connector on the other device.

Install the SFP Modules and Connect to the Ports

Follow these steps:

Step 1 Grasp the SFP module on the sides, and insert it into the switch slot until you feel the connector snap into place (see Figure 8).

Figure 8 Installing an SFP Module

11x

I

16x 15x 14x 13x

13x 12x 11x

143476

	Cisco Catalyst Blade Switch 3030 Getting Started Guide
1-20	78-17052-01