148
Connecting to external devices > Transferring les to your computer
Disconnecting the camera (for Windows 7)
With Windows 8, the methods for disconnecting the camera are similar.
1 Ensure that no data is being transferred between the camera
and the computer.

If the status lamp on your camera is blinking, it means the data
transfer is in progress. Please wait until the status lamp stops
blinking.
2 Click on the tool bar at the bottom right of your computer
screen.
3 Click the pop-up message.
4 Click the message box indicating safely removed.
5 Remove the USB cable.
Transferring les to your Mac OS
Mac OS 10.7 or later is supported.
1 Turn o the camera.
2 Connect your camera to a Macintosh computer with the USB
cable.

You must plug the small end of the USB cable into your camera. If the
cable is reversed, it may damage your les. The manufacturer is not
responsible for any loss of data.

If you try to plug the USB cable into the HDMI port, the camera may not
work properly.