Samsung NX3000 Using the Home Monitor+, 127, Enter your Samsung account ID and password to log

Wireless network

Using the Home Monitor+

Use the Home Monitor+ feature to connect the camera to a smart phone on which the Samsung Home Monitor+ is installed, and monitor a location.

• The Home Monitor+ feature is supported by smart phones that run the Android OS or iOS. (Some features may not be supported by some models.) Before using this feature, update the device’s firmware to the latest version. The Android OS must be 4.1 or higher.

•You should install the Samsung Home Monitor+ application on your smart phone before using this feature. You can download the application from Samsung Apps, the Google Play Store, or the Apple App Store.

1Rotate the mode dial to B.

2On the camera, select .

•If the pop-up message that prompts you to download the application appears, select Next.

3On the camera, select an AP from the list, and then position the camera.

•Place the camera in a safe location where children or pets cannot reach it.

•Point the camera lens at the subject.

•We recommend you use a fully charged battery or connect the camera to a power outlet with the AC adapter.

4Enter your Samsung account ID and password to log in.

•For information about entering text, refer to "Entering text". (p. 117)

•If you have previously logged in to the service, you may be logged in automatically.

5On the smart phone, turn on the Samsung Home Monitor+ application.

127