With a PC
56
LSQT0974
7Select [USB Video Device] in the [Camera]
menu.
8Select [DVC] in the [Microphone] menu.
≥Please refer to the HELP file of Windows
Messenger to understand its operation.
≥During set up, if [Primary video capture
device] selection screen is displayed,
[Panasonic DVC Web Camera] is selected.
ªSetting up MSN Messenger
When starting MSN Messenger for the first time,
its setup screen is displayed. (However, the
screen is not displayed if MSN Messenger setup
has already been done.) For more details, please
read the corresponding Help file.
In the case of MSN Messenger 7.0
1Click [Sign In].
2Type in your Sign-in name and password.
≥If you do not have your Sign-in name and
password, click [Get one here].
3Please carefully read the displayed
contents and then proceed.
4After the setup is completed, sign in and
start MSN Messenger.
5Click on [Audio Tuning Wizard...] in the
[Tools] menu to confirm that equipment is
connected correctly.
6Select the microphone attached to the PC in
the [Microphone] menu.
7Click [Web Camera Settings...] in the [Tools]
menu.
8Confirm that the [Panasonic DVC Web
Camera Device] is selected.
In the case of MSN Messenger 7.5
1Type in your E-mail address and password.
≥If you do not have a password, click [Get a
new account].
2After setup is completed, sign in and start
MSN Messenger.
3Click [Audio and Video Setup] in the [Tools]
menu and then click [Next].
4Set up the speaker settings.
5Select [DVC] in the microphone setup
screen.
6Select [USB Video Device] in the Webcam
setup screen and then click [Finish].
≥For other information about MSN Messenger,
please refer to Help.
≥When access is finished, close MSN
Messenger, then turn off the Camcorder.
Finally, disconnect the USB cable.
Using Quick Movie Magic or MotionDV STUDIO
When the OS is Windows XP/2000, the
Camcorder can be connected to the personal
computer with the DV cable.
When the OS is Windows XP/2000, the
Camcorder can be connected to the personal
computer with the USB cable. However, when the
OS is Windows 2000, USB driver must be
installed.
≥Do not connect the USB cable until the USB
driver is installed.
ªOperating environment
OS:
IBM PC/AT compatible personal computer with
pre-installed;
Microsoft Windows XP Home Edition/
Professional SP2
Microsoft Windows 2000 Professional SP4
CPU:
Intel Pentium III 800 MHz or higher (including
compatible CPU)
Graphic display:
High Color (16 bit) or more
(32 bit recommended)
Desktop resolution of 1024k768 pixels or more
(Supporting the overlay of DirectDraw)
Sound:
PCM sound source (Compatible DirectSound)
LSQT0974_ENG.book 56 ページ ２００５年１１月７日　月曜日　午前１１時５８分