Edit mode
50
LSQT0974
Audio dubbing
You can add music or narration to the recorded
cassette.
(Audio dubbing can only be performed by
using the remote control.)
≥Set to Tape Playback Mode.
1When using an external microphone,
securely insert the plug into the [MIC]
terminal.
2Find a scene that you want to add sound to,
and press the [;] button on the remote
control.
3Press the [AUDIO DUB] button on the
remote control to make audio dubbing
ready.
4Press the [;] button on the remote control
to start audio dubbing.
≥Be sure that the sound is directed towards
either the external microphone or the built-in
microphone.
5Press the [;] button on the remote control
to stop audio dubbing.
≥If a tape has a non-recorded portion when the
tape is dubbed, images and sounds may be
disturbed when this portion of the tape is played
back.
ªBefore recording with audio dubbing
≥Set to Tape Recording Mode.
≥When you want to preserve the original sound
taken during recording, set [ADVANCED] >>
[AUDIO REC] >> [12bit] to take pictures. (When
set [16bit], the sounds taken during recording
are erased after recording with audio dubbing.)
≥Set [BASIC] >> [REC SPEED] >> [SP] to take
pictures.
ªTo play back the sound recorded with

audio dubbing

You can switch between the sound recorded with
audio dubbing and the original sound.
Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX].
[ST1]: It only plays back the original sound.
[ST2]: It only plays back the sound added by
audio dubbing.
[MIX]: It simultaneously plays back the original
sound and the sound added with audio
dubbing.
≥During audio dubbing, it is automatically set to
[ST2].
MIC
;
A.DUB ;
A.DUB ¥
LSQT0974_ENG.book 50 ページ ２００５年１１月７日　月曜日　午前１１時５８分