167
Appendix
Updating the firmware
Connect the camera to the computer and update the rmware of the
camera of the lens.

You cannot run a rmware upgrade without a fully charged battery. Recharge
the battery fully before running a rmware upgrade.

If you update the rmware, user settings and values will be reset. (Date, time,
language, and video out will not change.)

Do not turn the camera o while the update is in progress.
1 Turn o the camera.
2 Connect your camera to the computer with the USB cable.

You must plug the small end of the USB cable into your camera. If the
cable is reversed, it may damage your les. The manufacturer is not
responsible for any loss of data.

If you try to plug the USB cable into the HDMI port, the camera may not
work properly.
3 Turn on the camera.
4 On the computer, select i-Launcher
ĺ
.
5 Follow the on-screen instructions to download the rmware to
the camera.

You can download the rmware of the camera or the lens.
6 Turn o the camera when the download completes.
7 Remove the USB cable.
8 Turn on the camera.
9 Press [m]
ĺ
q
ĺ
Device Information
ĺ
Software
Update
ĺ
Body Firmware or Lens Firmware.

10

Select Yes from a pop-up window on the camera to update
the rmware.