Philips MCD728/93 manual Connecting speakers, Connecting the control cable, Connecting TV

Connections

English

Step 2: Connecting speakers

1Connect the speaker wires to the SPEAKERS terminals, right speaker to FRONT (4Ω) R and left speaker to FRONT (4Ω) L. Fully insert the connectors on the cables into the terminals and fasten the hooks to ensure firm connection.

2Connect the passive subwoofer to the SUBWOOFER (8Ω) terminal with the supplied subwoofer cable by matching the plug types.

Notes:

–Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

–For optimal sound performance, use the supplied speakers.

–Do not connect more than one speaker to any one pair of +/- speaker jacks.

–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

Step 3: Connecting the control cable

●Connect the serial port marked “CONTROL CABLE” at the rear of the DVD player to the same port at the rear of the power amplifier with the supplied flat control cable.

Step 4: Connecting TV

IMPORTANT!

–You only need to make one video

connection from the following options, depending on the capabilities of your TV.

–Connect the DVD system directly to the TV.

Using Composite Video jack

1Use the composite video cable (yellow) to connect the system's VIDEO jack to the video input jack (or labelled as A/V In,Video In, Composite or Baseband) on the TV set.

2To listen to the TV channels through this DVD system, use the audio cables (white/red-not supplied) to connect AUX IN L/R jacks to the corresponding AUDIO OUT jacks on the TV.

10