Philips PDCC-JS-JW-0731 Switching the system on/off, Volume control, Sound control, Loudness, Dvs

				Basic Operations
	Switching the system on/off		DSC (Digital Sound Control)
● Press STANDBY-ONB(B on the remote).		DSC provides a different type of preset sound
➜ “HELLO” is displayed briefly.The system will		equalizer setting.
	switch to the last selected source.	● Press DSC on the system or remote control
● Press DISC, TUNER or AUX on the remote.		repeatedly to select: FLAT, POPS, JAZZ, CLASSIC
➜ The system will switch to the selected source.		or ROCK.
	To switch the system to standby mode		LOUDNESS
● Press STANDBY-ONB(Bon the remote).		LOUDNESS feature enables the system to
➜ “BYE BYE” is displayed briefly.The interactive		automatically increase the treble and bass sound
	sound settings, last selected source and tuner	effect at low volume (the higher the volume, the
	presets will be retained in the player’s memory.	lower the treble and bass increase).
		● Press LOUDNESS on the remote control to
	Power-saving automatic standby
		enable or disable LOUDNESS feature.
As a power-saving feature, the system will		➜		icon appears/disappears after this feature
	automatically switch to Standby mode if you do	is enabled/disabled.
	not press any buttons within 15 minutes after a
	disc has stopped playing.		DVS
		DVS (Dolby Virtual Speaker) technology creates
	Volume control
		a highly compelling 5.1-channel listening
Turn VOLUME (-/+)clockwise or anticlockwise		experience from as few as two speakers, making
	(or press VOL +/- on the remote) to increase	it an ideal entertainment solution for locations
	or decrease the volume level.	where space for multiple speaker setup is limited.
➜ ”VOL XX” is displayed on the display panel.		DVS feature enables you to switch between the
	XX	surround sound mode and ordinary music
	“ ” denotes the volume level.	mode.
	To switch off the volume temporarily
● Press MUTE on the remote.			Music mode		Surround mode
➜ Playback will continue without sound and
	“MUTING” flashes.
● To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
		● Press MOVING SPEAKES to switch between
	Sound control	the surround sound mode and ordinary music
	DBB, DSC, LOUDNESS and DVS sound	mode.
		➜ When the surround sound mode is enabled,
	features cannot be activated at the same
		a “DVS” icon will appear on the display panel and
	time.
		the top parts of the left and right front speakers
		will swivel sideways to achieve the moving
	DBB (Dynamic Bass Boost)
		surround effect.
DBB enhances the bass response.
		➜ When the surround sound mode is disabled,
● Press DBB on the remote repeatedly to select		the “DVS” icon will disappear from the display

DBB ON or DBB OFF.	panel and the top parts of the left and right front
	speakers will return to their previous positions
➜ Some discs might be recorded in high
	to resume the ordinary music mode.
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.

English

21