Philips MCD728/93, PDCC-JS-JW-0731 manual TV Mode, Picture Setting, Hdmi Setup

System Menu Options

English

DVD micro system to your TV.

➜S-VIDEO: Select this if you have connected the DVD micro system to your TV using S-Video jack.

➜Pr/Cr Pb/CbY: Select this if you have connected the DVD micro system to your TV using Component video jacks.

Notes:

–When the player is set to Y Pb Pr (YUV), some TV may not properly synchronise with the player on the SCART connector.

–This option is available only when the "HDMI" is set to "OFF".

TV MODE

Selects interlace or P-SCAN video output mode when Pr/Cr Pb/CbY is selected.

➜P-SCAN and INTERLACE.

In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD player's Y Pb Pr jacks to your TV that supports the progressive video input. Otherwise, a distorted picture will appear on the TV. For proper progressive scan set up, see “Getting started-Setting up Progressive Scan feature”.

Note:

–This option is available only when the "HDMI" is set to "OFF".

PICTURE SETTING

This menu helps you to set the video quality.

1Press 3 4 to highlight “PICTURE SETTING”.

2Press 2 or OK to enter PICTURE SETTING.

The options included in PICTURE SETTING page are:“SHARPNESS”, “BRIGHTNESS”, “CONTRAST”,“GAMMA”,“HUE”, “SATURATION” and “LUMA DELAY”.

SHARPNESS

Adjusts the sharpness level.

➜HIGH, MEDIUM and LOW.

BRIGHTNESS

Adjusts the brightness level. Range: -20-+20.

CONTRAST

Adjusts the contrast level. Range: -16-+16.

GAMMA

Adjusts the gamma level.

➜HIGH, MEDIUM, LOW and NONE.

HUE

Adjusts the hue level. Range: -9-+9.

SATURATION

Adjusts the saturation level. Range: -9-+9.

LUMA DELAY

Adjusts the luma delay.

➜0 T and 1 T.

HDMI SETUP

The options included in HDMI SETUP Page are: "HDMI" and "RESOLUTION".

HDMI

This option is used to enable/disable HDMI output.

➜ON: Enables HDMI output.

➜OFF: Disables HDMI output.

RESOLUTION

You can select the resolution of the picture according to your preference and the connected

HDMI TV.

The resolution options include 480p (60Hz), 720p (60Hz), 1080i (60Hz), 576p (50Hz), 720p (50Hz) and 1080i (50Hz).

Notes:

–This option is available only when the "HDMI" is set to "ON".

–If no display appears on the TV screen due to unsupported resolution, reconnect any available interlace video output to your display and re-adjust the resolution settings to 480p/576p.

32