Useful Features
�
Locking the Operation Buttons on the Projector
Network &FeaturesFunction
Projector | Remote Control |
1, 6 2, 3, 4
5
1.2.3 4.5.6
(GUI)
Deselecting Inputs
This function can be used to lock the use of certain operation buttons on the projector. The user can still operate the projector fully with the remote control.
Description of Keylock Levels
Selected item | Description |
Normal | All operation buttons are functional. |
|
|
Level A | Only INPUT, VOLUME, MUTE, on the |
| projector are available. |
Level B | All operation buttons on the projector are |
| unavailable. |
|
|
(Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (2)”.
3Press ∂/ƒ to select “Keylock Level”, and then press ©.
4Press ∂/ƒ to select the desired level.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
•To cancel the Keylock Level, perform the above procedure using the remote control.
•See page 61 for details using the password function.
Useful
Projector | Remote Control |
1, 6 2, 3, 4
5
This function allows you to deselect unwanted signal input.
(Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (2)”.
3Press ∂/ƒ to select “Set Inputs”, and then press ©.
1.2.3 | 4.5.6 |
| 4 Press ∂/ƒ to select the input you want to set to |
| block. |
(GUI) | 5 Press ENTER to select “ON” or “OFF”. |
| |
| 6 To exit from the GUI, press MENU. |
• Input 6 can be selected only when an SDI board is installed. Otherwise it is displayed in gray.
• When stack projecting,
• Up to two input signals can be blocked for both Input 1, 2, 3 or Input 4, 5, 6.
• For details on intended purpose, see pages 67 and 68.