Sharp XG-V10XU Watching Video Images and Laser Disc Images, VCR or Laser disc player, E-17

Setup Connections&

Watching Video Images and Laser Disc Images

Connecting to a VCR, laser disc player and other audiovisual equipment using the BNC video Input

1 Connect each BNC connector of a component or video cable to the corresponding BNC INPUT 4 or 5 terminals on the projector.

• BNC-RCA adaptors are needed for use with RCA type cables and sources.

2 Connect the other end of the cable to the corresponding terminals on a VCR or laser disc player.

3 To use the built-in audio system, connect one end of an audio cable (sold separately) to AUDIO INPUT 4 or 5 terminal on the projector.

4Connect the other end to the audio output terminal on the video component.

The S-VIDEO INPUT terminal uses a video signal system in which the picture is separated into a color and a luminance signal to realize a higher-quality image. When cables are connected to both the S-VIDEO INPUT 4 or 5 and VIDEO INPUT 4 or 5 terminals, images input through the S-VIDEO INPUT 4 or 5 terminal have priority over images input through the VIDEO INPUT 4 or 5 terminal.

•For higher quality video, you may use the S-VIDEO INPUT terminal on the projector. S- video cable is sold separately.

•If your video equipment does not have an S-video output terminal, use a composite video cable.

Three BNC-RCA adaptors (Sold separately)

	2 To video
Video cable (sold separately)	output terminals

or

Component cable (sold separately)

1 1

2 To analog component output terminals

VCR

or

Laser disc player

4 To audio output terminals

3	Audio cable
	(sold separately)

S-video cable (sold separately)

CAUTION

To S-video output terminal

•Always turn off the projector before connecting to video equipment, in order to protect both the projector and the equipment being connected.

E-17