Sharp XG-V10XU Using the Operation Buttons, Selecting the Input Signal Source, Muting the Sound

ButtonsOperation

Using the Operation Buttons

Selecting the Input Signal Source

Projector	Remote Control		Press INPUT 1.2.3 or INPUT 4.5.6 again to change the
			mode.
			• When no signal is received, “NO SIGNAL” will be displayed.
			When a signal that the projector is not preset to receive is
			received, “NOT REG.” will be displayed.
	INPUT			On-screen Display
	buttons		INPUT 1 Mode	INPUT 2 Mode	INPUT 3 Mode
	1.2.3	4.5.6
			INPUT 4 Mode	INPUT 5 Mode	INPUT 6 Mode

Adjusting the Volume

Projector	Remote Control	Press VOLUME / to adjust the volume.
	VOLUME	On-screen Display
	buttons

1.2.3 4.5.6

Muting the Sound

Conference Series

Projector Remote Control

MUTE button

Press MUTE to temporarily turn off the sound. Press MUTE again to turn the sound back on.

On-screen Display

1.2.3 4.5.6

E-31